FEATURE HIGHLIGHTS
The PD1200 Garage Door Opener features a modern design with a powerful 1200N output torque, suitable for doors up to 18 square meters. It operates quietly with noise levels under 56dB and includes a courtesy light with a 3-minute timer. The remote control range extends up to 30 meters, supporting 20 remote controls. It is equipped with a 24V 5W globe, electronic limit switch, and offers optional accessories like solar systems and wireless keypads.
PRODUCT DESCRIPTION
1. Automatic safety reverse is designed to protect your children and properties.
2. Soft start-Soft stop function makes for quieter operations
3. Auto-Close function keeps your house by automatically closing the door upon entering or exiting the garage.
4. Self-learning open and close obstruction force.
5. Electronic limit, simple adjustment.
6. Available terminal for Photo beams & Extra receivers & Wire or wireless wall switch &
7. Caution light & Pass door protection device.
8. Energy saving - L.E.D courtesy light. Battery backup available.
9. Self-Lock in gear motors.
10. Lower headroom: Can be flush mounted for low headroom applications with as little as 30mm space range required.
FEATURES
-Soft start,soft stop
-Electronic limit -Ultra quiet
-Overload force detecting
-Fast automatic safety reverse
-Low-voltage protection
-Manual release in case of power failure
-Automatic closing available
-Connector for backup battery available
-Connector for wall switch available
-Connector for photocell available
-Connector for flash light as optional
-External fuse available
TECHNICIAL SPECIFICATIONS
Unit Model | PD800 | PD1000 | PD1200 |
Power supply | 220V,50Hz;110V,60Hz | ||
Motor Power | DC24V,100W | DC24V,120W | |
Open and close force | 800N | 1000N | 1200N |
Door area | 10 Sq.m | 15 Sq.m | 18 Sq.m |
Door moving speed | 16 cm/sec | ||
Limit Switch | Electronic limit switch | ||
Decoding / Frequency | Rolling code / 433.92MHz | ||
Extra remote control | 25 | ||
Remote control range | ≥30 m | ||
Working temperature | -20°C~50°C |
IMPORTANT SAFETY RECOMMENDATIONS
1. PLEASE READ CAREFULLY AND ADHERE TO ALL SAFETY AND INSTALLATION RECOMMENDATIONS.
2. The opener is designed and manufactured to meet local regulations. The installer must be familiar with local regulations required in respect of the installation of the opener.
3. Unqualified personnel or those persons who do not know the occupational health and safety standards being applicable to automatic gates and other doors, must in no circumstances carry out installations or implement systems.
4. Persons who install or service the equipment without observing all the applicable safety standards will be responsible for any damage, injury, cost, expense or claim whatsoever any person suffered as a result of failure to install the system correctly and in accordance with the relevant safety standards and installation manual whether directly or indirectly.
5. For additional safety we strongly recommend the inclusion of Photo Beam. Although the opener incorporates a pressure sensitive Safety Obstruction Force system the addition of Photo Beam will greatly enhance the operating safety of an automatic garage door and provide additional peace of mind.
6. Make sure that the garage door is fully open & stationary before driving in or out of the garage.
7. Make sure the garage door is fully closed & stationary before leaving.
8. Keep hands and loose clothing off the opener and garage door all the time.
9. The Safety Obstruction System is designed to work on STATIONARY objects only. Serious personal injury, death and / or property damage may occur if the garage door comes into contact with a moving object
10. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
11. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
User Manual