Rotatable Reflective Home Security Wireless Infrared Beam Multi-angle Reflective Sensor Photocell Switch
This polarized reflective red infrared photocell beam is designed for garage doors, swing gates, sliding gates, and various security applications.
Key Features
- Reliable Reversing Sensor: Outdoor photoelectric sensor with rapid response that creates a safety barrier to detect movement and automatically stops or reverses gates when obstructions are detected
- Wide Compatibility: Works with all gate openers and compatible with most third-party swing/sliding gate openers or garage door openers accepting Normal Open or Normal Close Dry Contact signals
- Easy Installation: Simple wire connection with screw mounting, waterproof cover for weather protection, and maintenance-free outdoor operation
- Durable Construction: Made of high-quality UV-resistant and flame-retardant materials for long-lasting performance
Applications
- Lifting doors and revolving doors
- Sliding doors and wall security protection
- Window and balcony security systems
- Warehouse security and access control
- Parking lots and outdoor security sites
Technical Specifications
| Input Voltage |
AC: 9V~ 24V DC: 12V~24V |
| Working current |
1) <35mA@12VDC 2) <19mA@24VDC |
| Detect distance |
1) ≥15m (with imported reflector) 2) ≥10m (with domestic reflector) |
| Reaction time |
≥ 30mS |
| Ambient light intensity |
Max.5000lux |
| Infrared light spec. |
1) Wave length: 740nm 2) Emission Type: Visible Red light |
| Output Port Loading |
1) AC 0.3A/120VAC 2) DC 0.8A/30VDC |
| Working temperature |
-20℃ ~ +60℃ |
| Storage temperature |
-30℃ ~ +80℃ |
| Product Size(L*W*H) |
112.7*47*42.9mm |
| Reflector Dimensions |
D82 x H8.3mm |
| Product weight |
151.5g (including sensor, reflector, mounting screw accessories, and rain cover) |
Product Installation and Precautions
- Do not exceed the maximum sensing distance during installation and commissioning.
- Install the reflector at a suitable height, with its reflective surface facing the sensor.
- Adjust the sensor horizontally and vertically to align with the reflector's center. Initial setup: Secure the sensor first, align the reflector, then move the reflector from near to far to the desired position.
- The infrared beam diverges with distance, so adjust the reflector up/down and left/right to find the optimal position. Ensure the infrared beam hits the reflector.
- Do not mount the unit on shaking or vibrating surfaces, as this may cause false triggering.