Automotive Paint Thinner is a professional solvent blend designed to adjust the viscosity of automotive coatings and improve spray performance during refinishing work. This product is commonly used in body repair workshops and automotive refinish facilities where consistent paint flow and smooth surface formation are required.

Formulated from carefully balanced organic solvents, the thinner helps coatings achieve better atomization during spray application. It supports clear coats, basecoats, and primers by allowing the paint to spread evenly across the surface. The stable evaporation rate helps painters reduce defects such as orange peel, uneven film formation, or dry spray.

The solution appears as a transparent colorless liquid with a typical solvent odor and is widely used in professional automotive repair systems.

Effective Viscosity Reduction
Helps automotive coatings reach an ideal spraying viscosity, allowing smoother application and better paint flow.

Improved Spray Atomization
Enhances atomization during spray gun application, producing a more uniform coating layer.

Better Film Leveling
Supports smoother paint film formation, helping coatings level naturally for improved surface appearance.

Balanced Evaporation Speed
The solvent system is designed to evaporate steadily, reducing the risk of dry spray or bubbling during application.

Strong Dissolving Capacity
Capable of dissolving most solvent-based automotive coatings, making it compatible with many refinishing systems.

This automotive thinner is commonly used in professional refinishing environments including:

• Automotive clear coat dilution
• Automotive primer dilution
• Basecoat viscosity adjustment
• Cleaning spray guns and painting tools
• Vehicle repair and repainting processes
• Industrial coating workshops

1. Mix the thinner with automotive paint or clear coat following the coating manufacturer instructions.
2. Stir the mixture thoroughly before spraying to ensure uniform viscosity.
3. Adjust the mixing ratio based on spray equipment and environmental temperature.
4. Apply using professional spray equipment such as HVLP spray guns.

Typical addition ratio ranges from 10 percent to 30 percent depending on coating type.

1 What coatings can this thinner be used with?
It can be used with most solvent-based automotive clear coats, primers, and basecoats.

2 Can the thinner be used to clean spray equipment?
Yes it can effectively clean spray guns and painting tools after coating operations.

3 What is the recommended mixing percentage?
Normally between 10 percent and 30 percent depending on coating viscosity and spraying conditions.

4 Is the product suitable for professional repair shops?
Yes it is widely used in automotive refinishing workshops and body repair centers.

5 How should the thinner be stored?
Store the product in a cool dry well ventilated place away from direct heat sources.

• Use only in well ventilated working areas.
• Avoid inhaling solvent vapors for long periods.
• Wear protective gloves and safety glasses during operation.
• Keep away from sparks open flames and heat sources.
• Seal the container tightly after use.