
Low-residue formula developed to leave minimal film—optimal for high-end paint jobs.
Gentle on primers and cured coatings when used correctly; reduces adhesion failures.
Clear instructions supplied: not for thinning; close cap immediately after use to prevent loss of solvent.
Two kit sizes for flexibility: small 1L boxes for shops, 4L cartons for high-volume users.
| Field | Value |
|---|---|
| Product | A507 BOSSDE Degreaser |
| Sizes & Net Weight | 1L (0.7 kg net) — 12/carton; 4L (2.8 kg net) — 6/carton |
| Recommended Use | Final wipe before primer/topcoat; clean putty dust before painting |
| Material | Fast-evaporating organic solvent blend (low residue) |
Q: Will A507 leave a haze?
A: Minimal haze by design—wipe thoroughly and allow full flash-off.
Q: Is it suitable for stainless steel or aluminum?
A: Yes, for surface degreasing prior to painting; avoid prolonged soaking.
Q: How soon after wiping can I paint?
A: After complete evaporation—typically seconds to a few minutes depending on temp. Use compressed air to speed dust removal.
Q: What wipes are recommended?
A: Lint-free nonwoven wipes (do not use cotton rags).
Q: Are certification documents available?
A: Yes—SDS, TDS, and packing lists available on request.


