5 inch 800x480 MIPI DSI LCD Touch Screen Display For Raspberry Pi 3 4B
General Description
DSI500-V1.0I is a 5 inch LCD display driver board; Supports DSI input; Support capacitive touch panel.
5inch IPS 800x480 MIPI DSI LCD Module for Raspberry PI 2B/3B/ 3B+ / 4B/ CM4/ 5 1. Connect to Raspberry PI MIPI DSI directly, no need other program.
2. IPS screen give you better viewing angle, very good picture and display effect.
3. Capacitive touch panel allow you to touch with your fingers. 5 points multi touch .
It's convenient for you to operate it.
4. Same size of LCD and PCB Board, Raspberry Pi positioning column M2.5 is reserved at the bottom
5. The display don't need an external power supply , the MIPI-DSI connection to Raspberry Pi is enough.
6. The refresh frequency is around 60 Hz.
7. Could customize PCB and Cover glass .
General Spec
Model Name | 5 inch DSI LCD Display |
Resolution | 800x480 |
Model Size (W*H*T)mm | 120.7x98x12.4mm |
Display Area (W*H)mm | 108x64.8mm |
Interface | MIPI DSI |
Display Mode | Normally Black,Transmissive |
Viewing | All/IPS |
Brightness | 400 cd/m2 |
Pin | 40 |
Touch | Captouch |
Application | For Raspberry Pi |
Operating temperatures | -20 to 70 degree |
Storage temperatures | -30 to 80 degree |
Product Details

TFT Applications
This 5 inch IPS 800x480 MIPI DSI LCD Module can use for Raspberry PI 2B/3B/ 3B+ / 4B/ CM4/ 5.



