Efficiency Meets Resilience. Engineered for demanding industrial environments, the AIRERA 560kW Industrial Air Compressor is your ultimate workshop powerhouse. Featuring exceptional high-temperature compatibility, it thrives under extreme conditions, while its advanced low-temperature exhaust technology minimizes thermal load to protect downstream equipment. With a robust 560kW power output, this compressor delivers a continuous, high-volume air supply, ensuring stable, 24/7 uninterrupted operation. Eliminate downtime risks and maximize production efficiency—AIRERA is the beating heart of your factory floor.
Fan motor
Motor IP class : IP44;Motor without self cooled function;Motor without service factor;Low cooling air flow;Lower cooling air pressure;

Air end
Higher efficiency than single stage(>15-30%),bigger air flow,low noisy,power saving,reduce exhaust temperature and improve the volumetric efficiency of the compressor.It can make the gas force smaller and more uniform.

A separate generously sized cooling air fan provides several times the minimum required volume for the motors.The motor is sited in the main cooling air intake flow, which means:the coolest air crosses the motor first, increased service life.The ambient cooling air also cools the switch cabinet and the electrical components , which ensures:low component temperature and extended service life.

| ITEM | UNIT | MODEL LGCD-560II |
|---|---|---|
| Air capacity | m³/min | 84.8`119.90 |
| Working pressure | MPa | 0.7~1.3 |
| Compressor type | Oil inject dual stage screw compressor | |
| Cooling type |
Air cooling |
|
| Driven type | Direct driven | |
| Inlet status Temperature | ℃ | ≤45 |
| Inlet status Pressure | MPa | Atmospheric pressure |
| Inlet status Relative humidity | ≤90% | |
| Noise Level | dB(A) | ≤79 |
| Residual oil content | ppm | ≤2 |
| Drive rotor speed | rpm | 1490 |
| Compressed air outlet temperature | ℃ | Ambient temperature+10 |
| Cooling air flow | m3/hr | 26200 |
| Control mode | Intelligent controller | |
| Safety valve set pressure | MPa | 0.77-1.43 |
| Lubricating oil volume | L | 200 |
| Lubricating oil brand | ROTORCOMP | |
| Compressed air outlet connection | DN200 | |
| Dimension L | mm | 4500 |
| Dimension W | mm | 2500 |
| Dimension H | mm | 2200 |
| Net Weight | kg | 13500 |
| Motor Model | Y2-500L2-4 | |
| Motor Speed | rpm | 1490 |
| Motor Rated Power | KW | 560 |
| Motor Service factor | 1.2 | |
| Motor Protection type | IP55 | |
| Motor Efficiency | IE3 | |
| Motor Startup mode | ʏ-Δ starting | |
| Motor Voltage | V | 380(Special on request) |
| Motor Frequency | Hz | 50(Special on request) |
| Motor Rated current | A | 1005 |
| Motor Weight of motor | kg | 2950 |

The AIRERA 560kW unit comes standard with advanced two-stage compression technology.
Reduced Bearing Load: By distributing the total compression ratio across two sequential air ends, the pressure and thermal load on each rotor are significantly decreased.
Enhanced Stability: Lower internal pressure and reduced inter-stage temperatures ensure much more reliable 24/7 continuous operation. Furthermore, this design increases free air delivery (FAD) by approximately 8%–15% compared to single-stage alternatives, delivering a perfect combination of high output and extended lifespan.
AIRERA is engineered with an "Easy-Maintenance" philosophy at its core.
Extended Intervals: Thanks to our low-temperature exhaust technology and premium filtration materials, the replacement lifecycle for air filters, oil filters, and oil-gas separators is extended by over 20% compared to conventional equipment.
Accessible Design: The unit features a fully-opening enclosure door structure, making all routine service points (filters, valves, drains) easily accessible. Standard scheduled maintenance can be completed within 1–2 hours, minimizing planned downtime.