The MTLx525 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads such as solenoids, alarms, LEDs and other low power devices that are certified as intrinsically safe or are classified as nonenergy storing simple apparatus.
The MTL4525 allows a second safe-area switch or logic signal to be connected that enables the output to be disabled to permit, for example, a safety system to override a control signal.
Hazardous-area output
| Minimum output voltage: Maximum output voltage: | 7.8V at 48mA24V from 300Ω |
| Maximum off-state output voltage: 4V from 300Ω | |
| Current limit: Output ripple | 48mA minimum |
< 0.5% of maximum output, peak-to-peak
Control input on MTL4525
Suitable for switch contacts, an open collector transistor or logic drive
0 = input switch closed, transistor on or < 1.4V applied
1 = input switch open, transistor off or > 4.5V applied
Override input on MTL4525
An open collector transistor or a switch connected across the terminals can be used to turn the output off whatever the state of the control input
0 = transistor on or switch closed
1 = transistor off or switch open
Control and override inputs on MTL4525