As a non-carrier self-adhesive polymer-modified asphalt waterproof membrane, it takes SBS and other synthetic rubbers, premium road asphalt, and adhesion promoters as the core base materials. The upper surface is composed of polyester film (PET), polyethylene film (PE), aluminum foil, or silicone-coated release film, and the lower surface is equipped with a silicone-coated release film as the anti-sticking layer.
Membranes with PE or PET on the upper surface are suitable for non-exposed engineering projects. For auxiliary applications like additional layers, you can choose membranes with PE, PET upper surfaces or double-sided self-adhesive waterproof membranes without films. When applied as the main material in underground projects, a single layer of membrane must have a thickness of no less than 1.5mm; for double-layer use, the combined thickness should be no less than 1.5mm + 1.5mm.

- Cold application: No open flames, no adhesives required, energy-saving, environmentally friendly, low-carbon, and cost-effective
- Excellent bonding performance: Maintains a viscoelastic state for a long time to ensure the integrity of the waterproof layer
- High elongation performance and outstanding shear strain resistance
- Superior low-temperature performance
Construction Preparation → Base Layer Treatment → Brushing Supporting Base Layer Treatment Agent → Construction of Additional Layers for Detail Nodes → Snapping Reference Lines → Large-Area Self-adhesive Membrane Paving → Air Exhaust and Compaction → Compaction and Sealing of Lap Edges → Fixing and Sealing of Vertical Membrane Ends → Inspection and Acceptance → Protection Layer Construction