Smart Automatic Side-mounted Door Opener for School Mall Hospital Automatic Door System

Advantages of ZENTO automatic door opener:
 * Rebound adjustment when encountering resistance
 * Delay adjustment of door opening
 * Learning of door opening angle
 * Delay door opening function
 * Remote door locking function
 * Double door linkage function
 * Mother-child door function
 * Adjustable opening and closing speed
 * Support electric lock
 * Support secondary development

Automatic door opener function:
Single or double opening selection: Through remote control operation, single leaf can be opened and closed independently or both leaves can be opened and closed simultaneously.
Button lock: Through remote control operation, all buttons on the control panel can be locked to prevent theft.
Repeated operation limit: Prevent over-opening of the door and damage to the door caused by misoperation.
Automatic stop when encountering obstacles: The door opener automatically stops when encountering obstacles such as pedestrians and vehicles to ensure safety.
In-place prompt: When the door is in place and locked reliably, the controller will emit a "beep" prompt sound.
Time protection: The single operation time of the automatic door opener is set within 60 seconds to ensure the safety of the motor.
Infrared protection: Through the external infrared detector, pedestrians or vehicles pass by, and it will stop automatically (select).

ZENTO Automatic Door Parameter
|  			 Power supply voltage  |  			 			 220VAC+15%50HZ  |  		
|  			 Motor working voltage  |  			 			 24VDC  |  		
|  			 Angular velocity  |  			 			 69.7°/S  |  		
|  			 Motor thermal protection  |  			 			 F level 155°C  |  		
|  			 Use frequency  |  			 			 continuous use below 70°C  |  		
|  			 Use environment  |  			 			 indoor or outdoor  |  		
|  			 Body size  |  			 			 355.7-89.6-105.7mm  |  		
|  			 Packaging size  |  			 			 400*280*110mm  |  		
|  			 Equipment packaging weight  |  			 			 6.4kg  |  		
|  			 Motor power  |  			 			 Motor power: 40W  |  		
|  			 Rated torque  |  			 			 24.6Nm  |  		
|  			 Maximum door opening angle  |  			 			 +90  |  		
|  			 Maximum door width  |  			 			 2m (single leaf)  |  		
|  			 Maximum load-bearing capacity  |  			 			 150kg  |  		
|  			 Operation noise  |  			 			 <60dB  |  		
|  			 Working environment temperature  |  			 			 -25-70°C  |  		
|  			 Fixed base size  |  			 			 355.5*89mm  |  		
|  			 Drive mode  |  			 			 crank connecting rod drive  |  		



