Anti Swirl Gloss Clear TPU PPF Front Bumper Film

A body-shop grade paint protection film engineered for front bumper coverage. The 7.5mil aliphatic TPU give it a high-gloss, optical-clarity surface that resists wash swirls and stone chips while letting the original paint read through with no distortion. It is built for installers who care about numbers — elongation, peel strength, contact angle and UV stability — not just looks.

Technical Specifications

Why The Numbers Matter

≥300% elongation with low memory lets the clear film wrap sharp bumper corners and compound curves without lifting — a heat gun takes it past 200% if needed. A ≥15 N/25 mm peel strength holds through high-pressure washing, while the acrylic PSA still lifts cleanly during removal with no residue. A ~105° contact angle sheds water, mud and bug splatter so road rash and wash swirls stay on the film, not the paint.

Optical Clarity & Anti-Yellowing

A high-transparency aliphatic TPU top coat keeps colour shift and orange peel under control, so a gloss clear film stays crystal clear instead of turning hazy. QUV weathering with a colour change below ΔE 3 supports the anti-yellowing claim, and every roll is slit in a dust-free line to avoid trapped particles.

Where It Performs

• Front bumper: the highest stone-chip zone; needs the strongest adhesion of all panels.
• Hood leading edge and fenders: deflect gravel and road rash at speed.
• Mirror caps and A-pillars: light branch and brush contact.
• Rocker panels and door edges: grit spray and door-cup scuffs.
• Full body: an invisible gloss bra for tracked or highway-driven cars.

Production & Coating Line

YUXINFILM controls the whole chain — masterbatch, base film, coating, slitting and finished rolls — in one clean plant, with imported TPU equipment and in-house polymer and coating engineers. That vertical control is what keeps elongation, thickness and colour consistent from batch to batch.

Quality Control & Testing

Each batch is measured for thickness, elongation, adhesion and optical clarity before release, and free samples let installers confirm the film on a real panel before committing to bulk.

OEM / ODM Program

Private-label support includes your logo on the liner, custom packaging, custom slit widths, custom thickness, and gloss, matte or colour options, with pre-production samples signed off before mass run.

Certification

ROHS, ISO9000, MSDS, CE and test reports support tenders, marketplace compliance and distributor documentation.

FAQ (RAQ)

1. What does this clear film actually do for my car?
It is a see-through protective layer that sticks onto your front bumper, hood and mirrors. It takes the stone chips, bug splatter and small scratches so your paint underneath stays like new.

2. Will people notice it on my car?
No. It is fully clear and glossy, so your car looks exactly the same — just better protected. Even the shine stays the same as your original paint.

3. Can I wash my car like normal?
Yes. After the first week, hand washing or a normal car wash is fine. Just avoid aiming a high-pressure jet straight at the film’s edges.

4. What happens if it gets scratched?
Small swirls and light scratches fade away on their own when the film warms up — parked in the sun, splashed with hot water, or a quick pass with a heat gun. Bigger knocks are caught by the film instead of your paint.

5. Will it turn yellow or peel off after a few years?
It is made to resist yellowing and cracking and stays clear for years, backed by up to a 10-year warranty. When you do take it off, it comes away cleanly without leaving glue behind.

6. Can I order my own brand, samples or custom sizes?
Of course. We can print your logo on the film, make custom roll sizes and thickness, and send free samples first. Minimum order is just 1 roll.

Need the full technical data sheet? Send your target thickness, roll width and market, and our engineering team will return the TDS, sample and factory pricing. Contact us now to start your wholesale order of anti swirl gloss clear TPU PPF front bumper film.