There is a moment during installation when a homeowner first runs their hand across a real wood door — the subtle grain texture, the warmth synthetics lack, the faint scent of timber rather than chemicals. This Light Oak Real Wood Interior Door is built for that moment — and for the decades of performance that follow. Unlike "wood" doors using printed paper or PVC over MDF, this door features 100% real light oak surface over a 45mm reinforced solid core. The formaldehyde-free certification (GB 18580-2017 E0) is documented, not marketed. The water-based low-VOC sealant (≤50g/L vs. 300-500g/L for solvent-based) means no off-gassing waiting period. The insect-repellent treated core and cold-climate stabilization (-20°C to 45°C) ensure the door performs in any geography. Our comprehensive OEM/ODM program supports custom dimensions, any RAL/NCS color match, core fill options (solid wood, aluminum honeycomb, bridge board), panel style, surface processing, and hardware selection. From a single custom prototype to full container orders, we manufacture to your exact specification. The 30mm thickened frame — 8mm more than industry standard — is the detail most owners appreciate by year three, when the door still closes perfectly.

• 100% Real Light Oak Surface: Not printed paper. Not PVC film. Genuine light oak timber with natural grain, tonal depth, and the unmistakable tactile warmth of real wood under your fingertips.
• Complete OEM/ODM Customization: Custom dimensions, RAL/NCS color matching, core fill material (3 options), panel configuration, surface processing (water-based/veneer/baked), hardware — we build to your design, not our catalog.
• 45mm + 30mm Structural Advantage: 45mm leaf (vs. 35-40mm standard) for 25% more acoustic mass. 30mm frame (vs. 22-25mm standard) for better screw retention and sag prevention. A door that feels substantial in year ten.
• Water-Based Low-VOC Finish (≤50g/L): 85-90% fewer VOCs than conventional solvent coatings. Safe for occupied-home installation. Compatible with our formaldehyde-free E0 material chain.
• All-Climate + Insect-Resistant: Cold stabilized (-20°C to 45°C), moisture-proof core, anti-termite/anti-borer treatment. One door, any geography.

This recessed panel interior door features a solid wood composite frame combined with an optional engineered core structure. Depending on project requirements, different core configurations can be selected, including aluminum honeycomb, solid wood mesh, or other applicable engineered structures.

The structural design is intended to balance door stability, weight, and acoustic performance.

The deep walnut appearance can be customized through different surface processing options, including painted finishes, baked coatings, natural wood veneer, or other finishes according to the selected product configuration.

For projects requiring a natural wood appearance, veneer options can be customized according to the required wood grain, color, and interior design style.

The surface finishing process includes multiple preparation and finishing stages to achieve a smooth and consistent appearance. Depending on the selected finish, the door surface may be processed through sanding, coating, color adjustment, curing, and final surface inspection.

The door structure is designed to support stable performance under normal indoor environmental conditions. Door dimensions, thickness, core configuration, and frame construction can be customized according to project requirements and installation conditions.

This image shows part of the actual door assembly process at our manufacturing facility.

Our production team handles and assembles door components according to the confirmed product design and manufacturing requirements. Different components are prepared, positioned, and assembled during the production process to support customized door configurations.

The manufacturing process combines production equipment with hands-on workmanship. Production personnel participate in different stages of component preparation and assembly according to the product structure and project requirements.

This original factory photograph provides a real view of part of our manufacturing process and the practical work involved in producing customized wooden door solutions.

This photo shows part of our actual manufacturing environment, where door panels and engineered board materials are processed and handled during production.

The workshop is equipped with production machinery and material handling systems to support panel processing and manufacturing operations. Finished and semi-finished panels are organized and transferred through different production stages according to manufacturing requirements.

By combining production equipment with standardized manufacturing procedures, we aim to maintain consistent processing quality and production efficiency for different door configurations and project requirements.

Scandinavian-style homes, eco-conscious developments, wellness retreats, allergy-sensitive households, and boutique hotels. The low-VOC finish suits occupied renovations. Cold-climate and insect-resistant treatment makes it viable across climate zones from Nordic to tropical.

This image shows finished door products being prepared and loaded for transportation at our manufacturing facility.

Protective packaging is used during product handling and shipment preparation. Packaging methods can be adjusted according to product dimensions, order quantities, and transportation requirements.

For project and international orders, packaging requirements can be discussed according to the confirmed shipping arrangement.

We place importance on quality management, material selection, production control, and applicable compliance requirements throughout the manufacturing process.

Quality and compliance requirements may vary depending on the product configuration, materials, destination market, and project specifications. For customized door projects, applicable requirements can be reviewed according to the confirmed order specifications.

The certificate shown below is part of our available compliance documentation.

According to the information provided in the certification document, the tested product scope was evaluated in accordance with EN 16516:2017 and the applicable requirements referenced in the certificate.

The validity and applicability of certification documentation are limited to the specific product models, materials, and conditions described in the original document. Customers should confirm the applicable standards and documentation for their specific door configuration before placing an order.

For project requirements involving specific markets or compliance standards, our team can provide available documentation and discuss applicable product requirements based on the confirmed project specifications.

Certificate Type: Certificate of Compliance
Certificate No.: TQT0025B726EC
Test Standard: EN 16516:2017
Test Report No.: TQT0025B726E

Note: The certification document applies to the product scope described in the original certificate. Certification applicability for a specific door product should be confirmed according to the final product configuration and project requirements.

Q: Can I customize everything — dimensions, color, core, hardware — on a single door order?
A: Yes, through our OEM/ODM program. We accept custom specifications from single prototype samples to container volumes. Dimensions, any RAL/NCS color, core fill material, panel style, and hardware are all configurable. We produce a digital proof before manufacturing.

Q: How does the door perform in extreme cold or high humidity?
A: The core is stabilized for -20°C to 45°C operation and treated for moisture resistance (72hr @ 95% RH tested). Anti-termite and anti-borer compounds protect the core in tropical markets. Field installations span Northern European winters to Southeast Asian monsoon regions.