Hanna Instruments HI 98107 pHep pH Tester, with +/-0.1 Accuracy

Details

The pHep® revolutionized the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement.

The HI 98107 is used by millions of people around the world to monitor pH in laboratories and industrial applications as well as in agriculture, fish farming, food manufacturing and quality control, swimming pools and the printing industry.

With a renewable cloth junction, the pHep® has an extended life over typical pH testers. A normal junction clogs with use over time and a typical tester would normally have to be thrown away once the junction is too contaminated. HI98107’s junction is 2 cm long and when dirty, can be pulled out to expose a fresh section to effectively renew the pHep’s life.

Calibration is performed manually at 1 or 2 points with a trimmer located on the side of the tester.

With a battery life of 700 hours of continuous use, the pHep® will provide years of testing before the batteries need to be replaced.

Features at-a-glance

• Renewable junction
• Easy 2-point manual calibration
• 700 hour battery life
• Simple to use
• Economical

Specifications

Parameter	pH

pH Range	0.00 to 14.00 pH
pH Resolution	0.1 pH
pH Accuracy	±0.1 pH
pH Calibration	manual, two points
Battery Type / Life	1.5V (4) / approximately 700 hours of continuous use
Environment	0 to 50°C (32 to 122°F); RH max 95%
Dimensions	175 x 41 x 23 mm (6.9 x 1.6 x 0.9’’)
Weight	95 g (3.4 oz.)
Ordering Information	HI98106 (Champ®), HI98107 (pHep®), HI98108 (pHep®+) are supplied with protective cap, calibration screwdriver, batteries and instructions.