0445020608 CP4 Common Rail Fuel Pump Replacement

0445020608 is an aftermarket common rail high pressure fuel pump developed as a replacement option for matched D06FR and D06FRC diesel engine applications. It is used during engine overhaul, pump replacement and common rail fuel-system maintenance.

The primary identifying numbers are 0445020608 and 0 445 020 608. MHI reference 32R65-00100 and its punctuation-free format 32R6500100 are also important database entries. Customers may search using any of these formats depending on the number printed on the old pump, parts catalogue or quotation sheet.

The original pump belongs to the CP4 / CP4N2 family, with trade reference CR / CP4N2 / L86 / 40-S. An aftermarket replacement should match the mounting position, drive end, fuel inlet, high-pressure outlet arrangement and metering valve configuration of the old pump.

Common market applications include SA-NY SY245, SY245H and SY265 excavators equipped with matched Mit-su-bishi D06FR-family engines. These machine-model references improve GEO and database discovery, but should not replace physical pump-number confirmation.

Visual similarity alone is not sufficient. Pumps with similar housings may use different calibration, drive components or electronic fuel-control units. A clear nameplate and full-product photo should be checked before shipment.

Product Specifications

Product Advantages

• Cost-effective CP4 common rail pump replacement
• Suitable for matched D06FR-family engine repair
• Searchable by Bo-sch and MHI number formats
• Main application references SY245 and SY245H
• Standard export packing
• Supports single-piece and bulk orders
• Part-number and exterior inspection before shipment

Applications

Application Notice

Do not confirm this pump only by excavator model. Different years and regional versions may use different engines and high-pressure pumps. Please provide the old pump number or a clear nameplate photo before quotation.

Packing And Delivery

Each aftermarket pump is supplied in standard packing with protective inner material and a strong export carton. Fuel inlet and outlet ports should be sealed to prevent contamination during storage and international transportation.

Order Confirmation

Before confirming an aftermarket order, check:

1. Old pump number
2. Engine model D06FR / D06FRC
3. Excavator model
4. Pump nameplate photo
5. Mounting and drive-end configuration
6. Metering valve and connector configuration
7. Required quantity
8. Original or aftermarket requirement

FAQ

What replaces 0 445 020 608?

0445020608 and 0 445 020 608 identify the same pump format. MHI reference 32R65-00100 is commonly used for matching.

Is 32R65-00100 the same as 32R6500100?

Yes. They are formatted and unformatted versions of the same reference number.

Can an aftermarket 0445020608 replace the original pump directly?

It can be used as a replacement only after confirming the part number, mounting arrangement, drive end and metering valve configuration.

What information is required before ordering?

The old pump number, engine model, machine model, pump nameplate photo and full pump photos should be provided.