Moving Type Empty Bottle Leak Tester For Wide Mouth Bottles

Description

Implement airtightness testing on the specified specifications of the container to be tested. After the leak detection is completed, the qualified and unqualified products are seperated. During the testing process, the corresponding workstation will sound an alarm and remove the unqualified bottles, which will be separated from the qualified ones.

Machine Advantage:

• Adopting a servo linear module, this Moving Head Empty Bottle Leak Tester can track wide mouth bottles in real-time while conducting leak detection measurements. This advanced operation mode breaks through the limitations of traditional detection methods for open-top packaging. By precisely following the movement of wide mouth bottles on the conveyor line, it achieves an efficient high-speed leak detection effect—critical for wide mouth bottles (which are widely used in food, daily chemical, and pharmaceutical industries to hold granular sugar, solid detergents, or powdered reagents, with large-diameter openings (usually ≥30mm) and screw-on lids, requiring strict leak-proof testing to match the industry’s demand for easy filling/taking and moisture-proof storage). The servo system's high responsiveness and accuracy ensure that even tiny leaks can be accurately identified during the continuous movement of wide mouth bottles, providing a strong guarantee for product quality control in the open-top packaging industry.
• When operating at the same speed as other conventional leak detection equipment for open-top packaging bottles, it has a relatively small land occupation. Its compact structural design optimizes the layout of internal components. The rational arrangement of the servo drive system, detection sensors, and wide mouth bottle-conveying path allows it to fit perfectly in wide mouth bottle production workshops—where space is often planned to accommodate multi-spec wide mouth bottle lines and packaging material storage. Whether it is a newly built packaging factory or an old workshop undergoing production upgrades, this equipment can be easily integrated into the wide mouth bottle production line without requiring a large amount of additional space investment, helping enterprises save workshop layout costs while meeting strict quality standards.
• It is suitable for a wider range of wide mouth bottle types. Plastic wide mouth bottles (used for food storage, thick-walled but prone to lid-seal gaps during testing) which are often difficult to detect due to material and structural characteristics, are very suitable for this tester; it also shows excellent adaptability to wide mouth bottles with special structures (such as silicone gaskets or airtight locks) that complicate detection. Moreover, it features a non-intercepting design tailored to wide mouth bottles. During the leak detection process, the conveyor line does not need to stop. This not only ensures the continuous flow of the wide mouth bottle production line and improves overall efficiency, but also solves the problem of wide mouth bottle scratches or lid deformation caused by conveyor line stops in traditional detection. By maintaining continuous movement of wide mouth bottles, it avoids extrusion damage and ensures the integrity of wide mouth bottles during detection.