Conventional Manual Release Button For Fire Fighting Gas Extinghuishant Control System

  
  Introduction
Emergency start or stop button is used to control gas fire extinguishing system start-up and
  stopping . Usually installed in the field ,when the fire broke out inside the protected area ,press the " press spray " button on the emergency start and stop button ,you can send a request signal to the gas sprayed gas fire controller ( hereinafter referred to as the controller ) . Gas fire gas spray controller sends commands by the delay ,start spraying gas solenoid valve. During the delay ,if the site staff confirmed that no fire occurs,immediately press the "Stop" button to terminate the start.
Manual Release Station compatible with all the fire fighting panel. Widely used for Building, Home, Apartment etc
  Release button and STOP button
  Two buttons are protected by glass cover
  
  
  
  
   
  
  Product Range
  
  Conventional Fire Alarm System
  Addressable fire alarm system
  Gas Extinguishing control system
  Beam Detector
  4 wire smoke detectors with relay output.
  2 wire Conventional smoke and heat detectors
  Explosion-proof flame detector for fire alarm system
  Standalone smoke detectors and combustable gas detector
  
  
  Service
  
  1. OEM &ODM service.
  2. Provide technical support and after-sale service.
  3. 1 year warranty.
  4. Normally 15 working days lead time.
  5. Welcome sample order.