DX51D Regular Spangle Hot Dipped Galvanized Steel Coil 0.45mm × 1219mm for Furniture Panels and Sheet Fabrication

1. Product Overview

DX51D regular spangle hot dipped galvanized steel coil is commonly used for furniture panels, light fabricated parts, and general indoor sheet applications where corrosion resistance and stable forming performance are required. The hot-dip zinc coating protects the steel surface during storage, handling, and service, while the regular spangle finish provides a conventional galvanized appearance.

This 0.45 mm × 1219 mm specification is suitable for cut-to-length sheets, cabinet panels, counters, signboards, and other light-gauge fabricated products. For furniture-related applications, buyers usually focus on coating level, surface condition, and downstream processing compatibility rather than only base metal strength.

2. Technical Solution

Product performance is based on the following technical characteristics:

• Continuous hot-dip galvanizing with controlled coating mass
• Zinc layer providing barrier protection and sacrificial protection
• DX51D base grade supporting common sheet forming and bending operations
• Regular spangle surface suitable for standard visible galvanized finish
• Passivated, oiled, or anti-finger treatment for storage and later processing

For indoor furniture and fabricated sheet parts, a balanced combination of corrosion resistance, surface consistency, and sheet formability is more important than extreme structural strength. This is why DX51D and similar commercial grades are widely used in light fabricated coil processing.

3. Specifications

4. Application

• Furniture panels and fabricated cabinet parts
• Lampshades, counters, and signboards
• Household appliance outer shells
• Electrical cabinets and indoor enclosures
• Light industrial sheet metal parts
• Cut-to-length sheet supply for general fabrication

5. Processing

• Cut-to-length sheet production
• Slitting into narrower strips
• Bending and folding
• Stamping and punching
• Light roll forming
• Surface painting or lamination if required

6. Advantages

• 0.45 mm gauge is suitable for light sheet fabrication and panel forming
• 1219 mm width fits common cut-to-length and sheet processing lines
• Regular spangle provides a standard galvanized surface appearance
• DX51D grade supports common bending and forming operations
• Passivated, oiled, and anti-finger options improve storage and downstream handling
• Mill edge or cut edge can be selected according to fabrication needs

7. How to Choose

• Visible galvanized furniture parts → regular spangle is commonly selected
• Painting or laminated finish → anti-finger or passivated surface is often preferred
• Longer storage before processing → oiled or chromated surface is commonly used
• Cut-to-length sheet production → 1219 mm width is widely used for standard sheet formats
• Light fabricated panels → 0.45 mm is commonly selected for balance between rigidity and formability

8. FAQ

Q1: Is DX51D suitable for furniture and cabinet fabrication?
Yes, DX51D is widely used for light sheet metal fabrication where common bending and forming are required.

Q2: Can this coil be supplied as cut-to-length sheets?
Yes, the coil can be processed into sheets or slit strips according to downstream requirements.

Q3: Is regular spangle suitable for visible parts?
Yes, regular spangle is often used where a standard galvanized appearance is acceptable.

Q4: Which surface treatment is better for storage before processing?
Chromated or oiled surface is commonly selected to improve temporary corrosion resistance during storage and transport.

Q5: Can both 508 mm and 610 mm coil IDs be supplied?
Yes, both coil IDs can be arranged depending on processing equipment and order requirements.