T-DOCK is an intelligent automatic instrument management platform developed specifically for the T40 II Rattler. It can maintain up to 8 instruments simultaneously and automatically complete functions such as ventilation testing, calibration, zeroing, and data downloading; At the same time, T-DOCK innovatively offers a rapid ventilation test mode, which can complete the ventilation test of 8 devices in 15 seconds. Eight pedestals work simultaneously, greatly saving space, time, and standard gas, which can safely and professionally improve work efficiency.
T-DOCK is easy to install, with a capacitive touch screen that is easy and fast to operate, and a graphical interface that intuitively guides users through the entire process. T-DOCK can quickly export data from T40 II through USB storage devices, and can also directly connect to a printer via USB to print reports and certificates.
In addition, T-DOCK supports temporary power supply from USB-C power banks and can also be equipped with portable bag accessories, making it a highly mobile instrument maintenance solution that is not limited by site conditions.

warranty
2 years
display
5-inch color LCD touch screen
button
1 "Quick Ventilation Test" button, 1 "FN" button, 1 "Reset" button
power supply
Input: USB-C, DC20V/3.25A
Gas channel
3 independent air intakes (including 1 intake for rapid ventilation testing)
1 fresh air intake port
1 exhaust port

size
368 x 310 x 110 mm
weight
2.71kg

automatic testing
Automatic ventilation testing/calibration/zeroing/blowing
pump
2 pumps
Single pump flow rate: 2000ml/min, single pedestal flow rate: 500ml/min (maximum)
Communication (with printer or USB storage)
USB 2.0 or above
Printer PCL5 or above
software management
T40 II Rattler Instrument Firmware Upgrade
T-Dock Operating System (Android 7.1)
Adapting instruments
T40 II Rattler
Scalable battery
Powered by a power bank (USB TYPE-C), with a minimum power of 65 W
storage
16G ROM
rating
EMC Directive 2014/30/EU, EN IEC 61326-1:2021
FCC Part 15
IP20