219*26 Sustainable & Matte-Finished First-Gen Outdoor WPC Wall Panel

Product Summary

Manufactured through the precision extrusion of premium hardwood fibers and advanced polymer bases, the panel maintains a homogeneous composition without an artificial glossy plastic cap, preserving the authentic rustic matte texture and warm feel of real timber. Engineered for long-term structural integrity, it offers excellent resistance against splitting and warping under typical outdoor conditions. Its highly competitive pricing and mature interlocking design make it the go-to option for eco-resorts, landscape partitions, and facade renovations.

About this Product

• Pure Matte Wood Aesthetics

  • Designed as a traditional outdoor WPC wall panel, it bypasses the reflective glare of second-generation plastic coatings, offering a true-to-life matte surface that integrates seamlessly with natural landscapes.

• Unbeatable Budget Optimization

  • It stands as the most cost-efficient composite solution available, enabling commercial developers and homeowners to wrap large vertical surfaces beautifully without exceeding financial limits.

• Reliable Cross-Section Stability

  • The uniform compound mixture ensures consistent inner density, minimizing the risk of internal air pockets, cross-sectional bowing, or thermal deflection over decades of vertical service.

• Safe, Green & Circular Production

  • Crafted strictly from recycled wood resources and eco-safe polymers, it releases zero hazardous chemical gases or formaldehyde, delivering a fully sustainable option for green building projects.

Technical Specification

Certification

How to Install

Gap is King

Never butt panels tight end-to-end; leave a 2-5mm thermal expansion gap. Always leave 25mm space behind the panels for airflow.

Solid Base

Do not screw directly into concrete. Max joist spacing: 50cm.

Performance Advantages

Colors

Our Factory

FAQ

Q1: Can I install this first-generation outdoor WPC wall panel horizontally or vertically?

A1: Yes, it can be installed in both directions. However, your joist subframe orientation must always be perpendicular to the panels. If you want the wall panels to run vertically, the supporting joists behind them must be fixed horizontally to ensure a stable interlocking mechanical lock.

Q2: Does the water absorption of a first-gen panel cause it to rot over time?

A2: No, it will not rot. Although first-generation WPC contains exposed wood fibers on its surface and absorbs slightly more moisture than co-extruded panels, the high-density polymer encapsulation prevents the deep moisture penetration that causes fungal decay and rot in natural timber.

Q3: What should I use to remove stubborn tree sap or bird droppings from the surface?

A3: For sticky organic stains like tree sap or dried bird droppings, soak the area with warm soap water first to soften the residue. Then, use a medium-stiff nylon brush to gently scrub along the grain pattern. Never use strong solvent-based chemicals, as they might discolor the composite matrix.

Q4: Why is a minimum 35-45cm joist spacing strictly required during installation?

A4: First-generation panels rely heavily on the support density underneath. Keeping joist spacing between 35cm and 45cm provides excellent load-bearing distribution across the facade, ensuring the traditional composite material remains flat and completely resistant to sagging under extreme summer heat.