219mm Eco-Shielded & Fade-Resistant Co-Extrusion Outdoor WPC Wall Panel

Product Summary

Utilizing a synchronized thermal fusion method, a resilient, eco-friendly polymer defense shield completely envelops the rigid core matrix. This technical jacket completely blocks moisture ingress while offering an advanced weather barrier that easily withstands heavy rainfall and intense UV radiation. Featuring rich, deep-embossed organic grain patterns, it infuses luxurious architectural depth into any vertical facade without the need for lifetime painting, delivering a sustainable and everlasting finish for luxury estates and commercial storefronts.

About this Product

• Complete Moisture-Lock Polymer Shield

  • Engineered as a premium second-gen outdoor WPC wall panel, the co-extruded outer cap leaves no exposed wood fibers, creating an impenetrable waterproof boundary that stops moss, rot, and fungi.

• Color-Lock Technology Against Sun Bleaching

  • The high-performance shield contains built-in UV-blocking matrices that prevent the cladding from sun-bleaching, keeping the exterior wall vibrant and rich in tone for over 25 years.

• Non-Warping Cross-Section Stability

  • Reinforced by the multi-layered extrusion process, this panel resists cross-sectional warping, twisting, and thermal bowing, maintaining flawlessly aligned interlocking joint lines.

• Multi-Dimensional Wood-Grain Depth

  • Instead of a flat plastic appearance, the shield features randomized grain depth and multi-chromatic color blending, delivering the prestigious tactile luxury of expensive exotic hardwoods.

Technical Specification

Certification

How to Install

Gap is King

Never butt panels tight end-to-end; leave a 2-5mm thermal expansion gap. Always leave 25mm space behind the panels for airflow.

Solid Base

Do not screw directly into concrete. Max joist spacing: 50cm.

Application Gallery

Colors

Our Factory

FAQ

Q1: Will the surface shield of this second-gen outdoor WPC panel become sticky in intense heat?

A1: No, absolutely not. The outer shield is made from a specialized high-density polymer compound with a high thermal melting point. It remains completely dry, rigid, and non-sticky even when directly exposed to intense summer heatwaves reaching up to 70°C.

Q2: Does the co-extrusion wall panel contain any toxic chemical flame retardants?

A2: No. Our second-generation panels achieve an advanced fire-retardant rating (Class B1) through non-toxic, eco-friendly mineral additives integrated during the extrusion process. It releases no heavy metals or toxic halogen gases, making it perfectly safe for eco-conscious residential facades.

Q3: What should I use to wash off hard water mineral stains or water spots from the facade?

A3: Because the outer layer is non-porous, water spots or mineral scaling from sprinklers sit completely on the surface. You can easily remove them by washing the cladding with a mixture of mild household white vinegar and warm water, followed by a clean water rinse from a standard garden hose.

Q4: Why can't I use a steel wire brush to clean stubborn spots on a second-gen panel?

A4: Steel wire brushes or harsh abrasive pads will micro-scratch and permanently dull the high-tech polymer shield layer. This ruins the beautiful 3D embossed wood-grain texture and thin protective barrier. To clean stubborn debris, always stick to soft nylon-bristled brushes and standard soap detergents.