Stainless Steel Material Rope Safety Netting For Balustrading Fencing
Rope safety netting is custom-made for each individual application. There are no limits as far as length and width are concerned. The only restrictions concern handling when the netting is installed. Large expanses are possible because the mesh panels can be fixed together without a visible seam. Diagonal and irregular geometries can also be adapted.
Border Construction of rope safety netting
Border construction with eyelets, standard installation
Sides, with open cable ends for adaptations on site
Closed mesh with loose ferrule + connection ferrule, special border construction
Diagonal border construction with eyelets, standard
Diagonal mesh with eyelets at vertical border
Specification of rope safety netting
| Item No.s | Cable Diameter | Mesh Opening Size (W×H) |
| HH-32120F | 1/8 inch (3.2 mm) | 4.75 x 8.23 inch (120 x 207.8 mm) |
| HH-32102F | 1/8 inch (3.2 mm) | 4 x 6.9 inch (102 x 176.7 mm) |
| HH-3290F | 1/8 inch (3.2 mm) | 3.55 x 6.15 inch (90 x 156 mm) |
| HH-3276F | 1/8 inch (3.2 mm) | 3 x 5.2 inch (76 x 131.6 mm) |
| HH-3251F | 1/8 inch (3.2 mm) | 2 x 3.46 inch (51 x 88.3 mm) |
| HH-24102F | 3/32 inch (2.4 mm) | 4 x 6.9 inch (102 x 176.7 mm) |
| HH-2490F | 3/32 inch (2.4 mm) | 3.55 x 6.15 inch (90 x 156 mm) |
| HH-2476F | 3/32 inch (2.4 mm) | 3 x 5.2 inch (76 x 131.6 mm) |
| HH-2460F | 3/32 inch (2.4 mm) | 2.4 x 4.16 inch (60 x 104 mm) |
| HH-2451F | 3/32 inch (2.4 mm) | 2 x 3.46 inch (51 x 88.3 mm) |
| HH-2076F | 5/64 inch (2.0 mm) | 3 x 5.2 inch (76 x 131.6 mm) |
| HH-2060F | 5/64 inch (2.0 mm) | 2.4 x 4.16 inch (60 x 104 mm) |
| HH-2051F | 5/64 inch (2.0 mm) | 2 x 3.46 inch (51 x 88.3 mm) |
| HH-2038F | 5/64 inch (2.0 mm) | 1-1/2 x 2.6 inch (38 x 65.8 mm) |
| HH-1676F | 1/16 inch (1.6 mm) | 1.2 x 2.08 inch (76 x 131.6 mm) |
| HH-1651F | 1/16 inch (1.6 mm) | 2 x 3.46 inch (51 x 88.3 mm) |
| HH-1638F | 1/16 inch (1.6 mm) | 1-1/2 x 2.6 inch (38 x 65.8 mm) |
| HH-1630F | 1/16 inch (1.6 mm) | 1.2 x 2.08 inch (30 x 52 mm) |
| HH-1625F | 1/16 inch (1.6 mm) | 1 x 1.73 inch (25.4 x 44 mm) |
| HH-1238F | 3/64 inch (1.2 mm) | 1-1/2 x 2.6 inch (38 x 65.8 mm) |
| HH-1230F | 3/64 inch (1.2 mm) | 1.2 x 2.08 inch (30 x 52 mm) |
| HH-1225F | 3/64 inch (1.2 mm) | 1 x 1.73 inch (25.4 x 44 mm) |
| HH-1220F | 3/64 inch (1.2 mm) | 4/5 x 1.39 inch (20 x 34.6 mm) |
Rope safety netting Shape and design are mutually interdependent
The diamond-shaped X-TEND mesh flexibly plays with its geometry. Other mesh opening angles than 60° standard are project-wise feasible, either to obtain spatial curves and to form three-dimensional structures, or to achieve a different visual effect with a narrower or wider mesh pattern. Note that a homogenous tension across the entire mesh surface can be more difficult to realise than the standard 60° angle, depending on the geometry.
Basically, the more the mesh is opened, the wider but shorter the net – and vice versa.
We recommend a maximum opening angle of 70–75°.