Construction Security Temp Fence panels 6ft /1830mm x 9.5ft /2950mm Frame 1.6"/40mm*16ga mesh 3"x6" *3.5mm
We can supply temporary fence anywhere in Alberta, Northern BC, and Saskatchewan, Canada Market. We specialize in a temporary fence for construction, special events, seasonal enclosures, and emergencies. Our stable, freestanding fence will provide safety and security for any project. We can ship our fence anywhere in Canada, America , Europe Market
Fence height | 4ft, 6ft, 8ft |
Fence width/length | 9ft, 9.5ft, 10ft |
Wire diameter | 3mm, 3.5mm, 4mm |
Welded mesh hole opening | 50x100mm (2”x 4”), 75x100mm, 55x110mm, etc |
Frame square tube | 25x25mm, 30x30mm |
Horizontal square rail | 20x20mm, 25x25mm, 30x30mm |
Accessories | Top clip, base plate |
Raw material | Low carbon steel wire, carbon steel square tube |
Surface treatment | Epoxy polyester powder coated, pvc coated,galvanized |
Specification
-
Welded by low carbon steel wire or galvanized wire, with hot dipped galvanized or powder coated finish. Sized as required
-
Frame pipe is always square pipe 25mm,32mm,etc,and 20mm,25mm infilled pipe with 1.2mm,1.5mm,2.0mm,2.5mm thickness.
-
Mesh always are 50x100mm,50x150mm with 3mm,3.5mm,4mm wire diameter.
-
Panel size 6x9.5ft ,6x10ft ,8x10ft ,etc
Popular Size |
Wire Diameter | 3.00-5.00mm |
Mesh Opening | 50 x 100mm (2’' x 4’'),50*150mm |
Height | 4’-8' |
Width | 9'-12' |
Outside Frame | 25x25mm, 30x30mm |
Middle Pole | 20x20mm, 25x25mm |
Colour Available | Yellow, Grass green Dark green, Blue, red etc. |
Size could be as request |
Temporary fence Clamps
-
To connect the panels with galvanized or powder coated finish.
-
One side solid square bar(150x21.7x21.7mm), one side solid round bar(150x21.6mm) with solid square bar connector(100x22x10mm).
Base steel
-
Steel plate base for your choose.
-
Always the feet size is: L800mm x W80mm x 8mm,L 760mmxW120mmx8mm.
-
8mm plate with 19mm holes at each end for pins or stakes.
-
150mm solid rod (one square, one round).
-
With galvanized or powder coated finsih
1.professional Laboratory to test the zinc coating and tension strength----to be sure the materials are as same quality you required
2. Product first sample test then Quality spot check ----Measure all the specifications after the first product produced by kinds of tools. Make sure this is the thing we want.
On the other way, if there is any specifications wrong, we can correct it inmmediately, save more time, ensure the shippment we promised.