Compact industrial oil level sensor, for the following 5MPA, temperature is not high quality oil viscosity was measured at 200 is less deg.] C, can be added a variety of communication protocols;
Vehicle for oil level sensor for various fuel under normal temperature and pressure measurement, the output of the damping time 30-180s adjustable, band 485;
Standard industrial grade oil level sensor, suitable 5MPA less, at a temperature below 200 ℃ more viscous oily measured, can be attached a variety of communication protocols;
High temperature and high pressure industrial-type oil level sensor, for the following 32MPA, oleaginous temperature below 250 ℃ various measurements, can be attached a variety of communication protocols;
Universal type oil level sensor for various fuel under normal temperature and pressure, measured hydraulic oil, can take 485 [1].
Feature
● Plastic and aluminum alloy material, light weight and low cost
● Simple and strong structure, anti-vibration
● Reed switch, steady output signal
● Long using life, wear resistance
● Without limitation of environment
● Length can be customized
Specifications
| Material | Plastic and Aluminum alloy | |
| Length range | 100 to2,000mm for standard (can be customized) | |
| Installation | SAE standard 5 holes | |
| Flanges | Various types of flanges are available for fitting fuel tank if necessary | |
| Mounting | 5 pieces of M5 screws and 2 mm thick NBR gasket, or recommended 2 mm thick FPM gasket if be used in gas tank. | |
| Connector | Brand Delphi, Tyco or others is available according to customer’s Requi
rement | |
| Supply voltages | 10 to 32V | |
| Rated current for alarm switch | 500mA | |
|
Output signal | Resistance range | 0 to 190Ω |
| Voltage range | 0.5 to 4.5V or 0 to 5V (can be customized) | |
| Current range | 0 to 20mA or 4 to 20mA | |
| Operating temperatures | - 40 to 85°C | |
| Protection rank | IP65 | |
| Option | high/low alarm | |
| Resolution range | 10 to 40mm | |
Description
Fuel level sensor is widely used in fuel, water, kerosene, chemical tanks and suitable for truck
, generators/gen set, bus and marine field. With the electromagnetic induction principle, it ca n output signal stably and continuously. The sensor uses plastic and aluminum alloy material and has the characteristics of light weight and low cost.
