Molas B300(offshore) wind lidar is equipped with a network communication module
1,Product introduction
When there is no mains power supply, it is necessary to provide a stable 24V DC power supply for the radar. It is recommended to use solar panels, fuel cells, wind and solar hybrid power supply schemes, etc. These three power supply schemes can be purchased from Mulei Laser. The specific scheme and operation specifications can be Please refer to "Instructions for Radar Power Supply Solution" prepared by Mulei Company.
2,Product parameters
Powered by | 24V DC / 100~240V |
Power | 70W |
Size | 682mm x 520mm x 641mm |
Weight | <75kg |
Range of working temperature | -40℃ ~ 50℃(with over temperature protection) |
Operating humidity range | 0% to 100% |
Protection class | IP67 (complete machine) |
Eye safety | Class 1M (EN60825-1) |
Measuring distance | 30~300m |
Measurement layer | 12 |
Sampling rate | 1Hz |
Wind speed measurement accuracy | 0.1m/s |
Wind direction measurement accuracy | 1° |
Wind speed measurement range | 0~75m/s |
Wind direction measurement range | 0~360° |
Sweep cone angle | 28° |
Data output | Horizontal wind speed, vertical wind speed, wind direction Timestamp, GPS, temperature, humidity and pressure, statistics |
Data Format | ASCII |
Communication | Ethernet (100BASE-TX) 3G/4G WiFi, satellite communication (optional) |
3,Application scenarios
① Early detection of wind resources
② Offshore construction and operation and maintenance wind power monitoring
③ Prediction of wind power in offshore wind farms