Molas NL light detection and ranging Measurement Layer 10 lidar rental
   
  | Product introduction
   
  Molas NL is based on the principle of fully coherent Doppler detection for wind measurement, and its schematic diagram is shown in Figure 3. The pulse signal generated by the fiber laser is emitted into the atmosphere to be measured through an optical antenna, and interacts with the aerosol particles to generate a backscattered signal containing velocity information. The optical antenna receives the backscattered signal, beats it with the internal local oscillator light of the system, and ultimately converts it into an electrical signal. After the signal is amplified, the digitization of the electrical signal is completed by an analog-to-digital converter A/D. The collected data is transmitted to the processor, and the radial wind speed at different distances of each beam is obtained based on the signal processing algorithm. Finally, the reconstructed wind speed, wind direction, turbulence, wind shear and other information are obtained by combining the wind field model.
   
  | Application scenarios 
   
  True front wind measurement
 Real time data transmission and local storage
 Accuracy up to 0.1m/s and 0.5°
 high sample rate
 Multiple distance layers
 large range
   
   
  | Product parameters 
   	  	 		 			|  			 Measure the distance  			 |  			 			 50~200m  			 |  		
 		 			|  			 Number of measured sections  			 |  			 			 10  			 |  		
 		 			|  			 Sampling frequency  			 |  			 			 4Hz  			 |  		
 		 			|  			 Wind speed measurement range  			 |  			 			 -50 ~50m/s  			 |  		
 		 			|  			 IP(Optical Head)  			 |  			 			 IP66  			 |  		
 		 			|  			 Wind speed accuracy  			 |  			 			 0.1m/s  			 |  		
 		 			|  			 Accuracy of wind direction  			 |  			 			 ±0.5°  			 |  		
 		 			|  			 Measurement layer  			 |  			 			 Simultaneously measure and output 10 distance layers  			 |  		
 	 
   
   
  | Product Features 
   
  
  | Product Image
   
  