---6kv-36kv high voltage epoxy resin post reactance insulators with indicators

-

-

Indoors high voltage 6kv-36kv high voltage epoxy resin post reactance insulators

Specification:DXN series-voltage indicator

display devicehigh voltage indicator,indicator,high voltage live display device,high voltage display,led display,voltage indicator,device indicator.

Model:DXN6-T High Voltage Electrified Display Device Indicator

Operating humidity:Daily average 95%,mo.average90%

Operating temperature+40°C--~ -30°C

Application:

DXN series high voltage indicator is adapted for indoor.rated voltage 3~40.5kv,operation frequency 50Hz network to display the electrifying situation of the high voltage loop where the HVLDD is mounted,combine a high voltage equipment with live display device.

This voltage indicator type DXN6-T is a combination unit for indicating the voltage presence on M.V.cubicles by being installed on the capacitive dividers,and conform to the IEC61958-2000 Standard and National Standard.

-

We can manufacture and customize many kinds of high voltage transducers according to customer's requirement. such as 10kV, 24kV,35kV high voltage transducer,high voltage transformer,insulation transducer.

-

1.Adopts epoxy resin automatic pressure gel craft that be APG craft manufacture. Product beautiful, Machine ,Electrical performance fit.

2.Adopts high toughness epoxy resin manufacture , Machine capability excellent, And adopts low reaction activity recipe system , Material solidifies slow , Product body stress low. Maximum field enhances products machine capability .

3.Adds activated silica slight powder , Furthurs enhance epoxy resins machine capability ,Much ensures insulate long-term keep good electric insulate performance under wet work environment.

4.Adds organic color , Product color and lustre bright, Does not reduce products insulate performance

.

- 1.application range and characteristic

----- The indoor high volt charged display device is composed of three sensors and display(through lead connection),it is applied to certain indoor high volt electric equipment of rated frequency 50Hz and rated volt below 40.5KV,by this device,it could indicate charged condition in circuit,besides,it can be coordinate-operated with electromagnetic lock,which realizes forced lockout of switch handle and controlled by one high volt signal,while,its circuit system is stand-alone and not interfered one another.Just needing the high volt circuit electrified,even if display circuit and latching circuit arise fault simultaneously,the electromagnetic lock still stay in locking state,which could prevent from mishandle or entering into charged spacing.

-- 2.execution norm

DL/T538----------(-high volt charged display device-)

DL/T593----------(share technical demand of high-volt switching equipment and control equipment)-

JB/T10305---------(3.6KV~40.5KV high volt equipment indoor organic material post insulator’s technical condition)-

GB/T7354---------(partial discharge measuring)

-

-