The X-ray Image Intensifier E5877J-P1K is a high-performance industrial imaging solution designed to provide clear and detailed X-ray images. It features very high resolution and efficient soft X-ray penetration, making it ideal for non-destructive inspection applications in industries such as electronics, automotive, and aerospace. This lightweight and compact device enhances imaging efficiency and precision, ensuring reliable and accurate results.

1. Achieves very high resolution up to 110 Lp/cm in M mode for detailed imaging.
2. Compact design with an overall length of 226 mm and a maximum diameter of 164 mm.
3. Lightweight, weighing approximately 8.0 kg for easy integration and handling.
4. CsI direct deposit input screen reduces X-ray scatter and improves detection efficiency.
5. Anti-reflective coating on the output screen enhances image quality.
6. Dual operation modes (N mode and M mode) for versatile imaging needs.
7. Fast setup with a preheat time of less than 3 minutes.
8. Compliance with international safety standards for reliable and safe operation.

• Overall Length: 226±3 mm
• Maximum Diameter: 164±3 mm
• Nominal Entrance Field Size: typ. 100 mm
• Output Image Diameter: 20±1 mm
• Weight: approx. 8.0 kg

• Anode Voltage: 25 to 30 kV (N mode), 25 to 30 kV (M mode)
• G3 Electrode Voltage: 1.5 to 3.5 kV (N mode), 9.0 to 12.0 kV (M mode)
• G2 Electrode Voltage: 350 to 750 V (N mode), 150 to 550 V (M mode)
• G1 Electrode Voltage: 50 to 250 V (N mode), 150 to 350 V (M mode)
• Photocathode Voltage: 0 V

• DC Power Supply Input Voltage: 100 to 240 Vac 30VA
• DC Power Supply Output Voltage: 24±1 Vdc
• DC Power Supply Output Current: 400 mA max.
• Weight: approx. 1 kg

• Operating Temperature: 5°C to 40°C
• Storage Temperature: -15°C to 45°C
• Operating Humidity: 30% to 85% RH (non-condensing)
• Storage Humidity: 10% to 90% RH (non-condensing)
• Operating Pressure: 70 to 106 kPa
• Storage Pressure: 50 to 106 kPa

• Central Resolution: 77 Lp/cm (N mode), 110 Lp/cm (M mode)
• Conversion Factor (Gx): 90 cd/m2 (typ.) for 10 μGy/s (N mode), 90 cd/m2 (typ.) for 1 mR/s (M mode)
• Contrast Ratio: 22:1 (10% area) (N mode)

• Maximum Fluoroscopic X-ray Tube Voltage: 125 kVp
• Maximum Input Dose Rate: Continuous 4.37×10^-4 Gy/min [50 mR/min], Pulsed 8.73×10^-3 Gy/min [1 R/min]
• Minimum Distance Between Focal Spot and Entrance Plane: 73 cm