HALOTOLERANT BACTERIA

Main Functions:

■ If the salt content in sewage reaches 10%(100000mg/l),the bacteria will take acclimatiion and biofilm formation on biochemical system quickly.

■Improve the efficiency of organic pollutant removal,to make sure the BOD,COD&TSS content is OK for brine sewage.

■If the electric charge of sewage has large fluctuation,bacteria will strengthen the settleability of sludge to improve the effluent quality.

Application method:

(calculated by biochemical pond),for industrial sewage,first dosage should be 100-200 gram/m³;for municipal sewage,dosage should be 50-80 gram/m³.

Parameters:

The tests show that the following physical and chemical parameters on bacteria growth is the most effective:

■ PH: average range between 5.5 to 9.5, it will grow most rapidly between 6.6 -7.8 , and best ph value is 7.5.

■ Temperature: take effect between 8 ℃ - 60 ℃.Bacteria will die if the temperature is higher than 60 ℃. If it is lower than 8 ℃ , bacteria will not die, but the growth of bacteria cell will berestricted a lot. The most suitable temperature is between 26-32 ℃.

■ Dissolved oxygen : aeration tank in sewage treament,dissolved oxygen content is 2 mg/liter.The metabolic and regrade rate of bacteria could speed up by 5-7times with fully oxygen.

■ Micro-elements: proprietary bacteria group will need a lot of elements in its growth, such as potassium, iron, calcium, sulfur, magnesium, etc., normally it contains enough mentioned elements in soil and water.

■ Salinity: it is applicable in high salty water,the maximum tolerance of salinity is 10%.

■ Poison resistance: can more effectively resist chemical toxic substances,including chloride,cyanide and heavy metals,etc.

* When the contaminated area contains biocide,need to test the sffect to bacteria.