Chemical Auxiliary Agent Ink Waste Water Color Removing Decoloring Agent Industrial Waste Water Treatment
| Description: -
BWD-01 Water Decoloring Agent is a special product for de-coloring, flocculating, CODcr decreasing and other applications. It is used to remove color of waste water generated by textiles process houses and dyes industries and other fields, with strong decolorization (50%~99%) and removal of COD (50%~80%). -
By providing a large number of cations, the negative charge is brought on dye molecules are neutralized instability, at the same time with BWD-01 by a large number of hydrolysis of flocs, so as to achieve the purpose of decolorization. -
BWD-01 Water Decoloring Agent is specially working high performance with the dyeing wastewater containing the hydrophilic dyes, less dosage, fast speed, and also decrease the composition of COD. -
Application: wastewater treatment in paint industry, industrial waste water treatment, flocculation water treatment, water clarifying agent, water purifying agents, decolouring agent, cationic polymers water treatment |
Specifications:
| Appearance: | Colorless and Translucid Liquid |
| Solid Content: | 50%min |
| Viscosity(25°C, cps): | 50-300 |
| PH Value (30% Water Solution): | 3-6 |
| Specific Gravity (at 20°C): | 1.1-1.3 |
| Water Solubility: | Completely Soluble With Water at Any Rate |
| Package: | 30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum |
| Storage Temperature: | Room temperature |
Application Methods:
| 1 | Make BWD-01 solution, mix with 40 times water to have 2.5% solution for use. |
| 2 | Make PAC solution, 2-5% Al2O3 |
| 3 | Make solution of Anionic Polyelectrolyte, 0.1%. |
| 4 | Prepare the effluent, test pH value, adjust pH value to 8-9.(It is very important, higher or lower pH, BWD-01 works not well) |
| 5 | Add PAC solution, mix with effluent completely. about 1-3 minutes |
| 6 | Add BWD-01 solution, mix with effluent completely, about 5-10 minutes |
| 7 | Add small content of anionic polyelectrolyte solution, mix slowly to have big floc. (this step is suggestion) |
| 8 | Sedimentation |
| 9 | Check color for treated effluent |
| 10 | Adjust dosage of BWD-01 and PAC to do more test to have better testing result. |
Package and Storage: - Packed in 30kgs, 50kgs, 250kgs net plastic drums and 1250kgs net IBC drums, or others according to the requirements of clients.
- Suggested to store in room temperature, would show slightly stratification or appear white at low temperature, cannot be placed in the sun.
|
Bluwat Main Products:
- BWD-01 Water Decoloring Agent , for color removal for textile dyeing wastewater treatment and for other wastewater .
- Poly Aluminium Chloride(PAC) , for drinking water treatment for wastewater treatment.
- Polyacrylamide (PAM)/Polyelectrolyte , for water treatment, for suldge treatment.
- PHPA(Partially Hydrolyzed Polyacrylamide) For Drilling , for drilling mud additive in the oilfield.
- Ferric Sulphate , for drinking water and wastewater treatment.
- PolyDADMAC , for water treatment and for paper mills and for cosmetics.
- Polyamine, for drinking and wastewater treatment, sludge dewatering, paper making and oilfield.
- Aluminum Chlorohydrate(ACH) liquid & powder, for drinking water treatment and other fields.
|
