Leather and plant processing generate oily and colloidal loads that are hard to separate. Bluwat Demulsifier breaks these emulsions, helps form strong flocs, and improves clarification efficiency.
The cationic polymer disrupts emulsion stability and binds fine particles into larger, settleable flocs. It is water soluble and easy to dose in existing mixing tanks without new hardware.
Typical dose range 50 to 1000 ppm based on oil and solids content.
| Item | Specification |
|---|---|
| Appearance | Yellow to Brown liquid |
| Active content | >= 40 percent |
| Product pH | 2 to 4 |
| Recommended pH of use | 5 to 12, best near 9 |
| Typical dosage | 50 to 1000 ppm |
We help processors meet discharge targets while controlling total cost. Bluwat offers reliable supply and application expertise from lab to full scale.