Basic Specification:
|   			 DR-E03 (Photocontrol) Parameters  |   			  			 |   		|
|   			 Sensor Type   			 |   			  			 Photodiode   			 |   		|
|   			 Rated Voltage   			 |   			  			 110V~480V AC   			 |   		|
|   			 Reted Frequency   			 |   			50/60HZ | |
|   			 Working Mode   			 |   			  			 <10~20 Lux / ON ,  >30~60Lux / OFF,Time-delay: 2 Seconds   			 |   		|
|   			 Load Current   			 |   			  			 16A (220Vac)   			 |   		|
|   			 Ambient Temp   			 |   			  			 -40℃~105℃   			 |   		|
|   			 Size   			 |   			  			 φ80.5mm * φ51.6mm(Height)   			 |   		|
|   			 Case Material   			 |   			  			 UV resistant PC   			 |   		|
|   			 Shell Design   			 |   			  			 It Conforms to American National Standard ANSI C136.41-2013   			 |   		|
|   			 Safety Certification   			 |   			  			 E510435,Vol 1 , Contact Us For More Informations   			 |   		|
|   			 Life Span   			 |   			  			 Quality Assurance for 3 Years   			 |   		|
|   			 Applications   			 |   			  			 Street /Roadway Lighting, Photocontrol Lighting, Parking Lot Lighting,   			   			Garden Lighting, Smart City, Smart Street Light, 5G, Smart Pole   			 |   		|
What are NEMA photocell receptacles
  On the top of most street lights or parking lot lights is a blue or black round knob that is actually used as a lighting control device. 
The most common lighting control is a dusk to dawn or photocell device. The receptacle can be used for dusk to dawn sensors,
but also for advanced DALI / Bluetooth controls. The 3, 5 and 7 pin standard are set by NEMA and are standard in the lighting
industry across all manufacturers. They are all the same 3 pin twist lock system so they are easily swapped out. The 5 pin and
7 pin add some additional features.
If you have an outdoor lighting fixture with a receptacle but want to turn it on or off with a switch or use another control instead
of the photocell, there is an easy fix. The sensor can easily be swapped with a shorting cap or bypass cap outfitted with the same
3 prongs to bypass the sensor.




