Product Overview
The Rear Axle Nut / Hub Nut LR024151 is a critical fastener for securing the wheel bearing and hub assembly to the axle shaft on a wide range of for Land Rover and for Jaguar vehicles. This nut provides the necessary clamping force to maintain bearing preload and hub integrity. It is a torque-to-yield fastener, meaning it must be replaced with a new nut every time it is removed to ensure proper clamping force and prevent failure .
Key Features
Secures wheel hub – clamps the hub and bearing assembly to the axle shaft
Single-use design – must be replaced with new nut whenever removed; cannot be reused
M24 x 2.0mm thread pitch – course thread design for heavy-duty applications
Direct-fit replacement – matches factory specifications
OE Cross-Reference
| Land Rover | Jaguar |
|---|---|
| LR024151 | C2P12731 |
Additional interchange numbers: XR827062, XR81695, LR025959, TDB500080, TDB500090, TDB500100, TDB500110, TOB500250, TOB500260, TOB500270, TOB500280, LR014491
Vehicle Fitment
| Make | Model | Chassis / Series | Years | Position |
|---|---|---|---|---|
| for Land Rover | Discovery 3 / LR3 | L319 | 2005 – 2009 | Front & Rear |
| for Land Rover | Discovery 4 / LR4 | L319 | 2010 – 2016 | Front & Rear |
| for Land Rover | Discovery 5 | L462 | 2017 > | Front & Rear |
| for Land Rover | Discovery Sport | L550 | 2015 > | Front & Rear |
| for Land Rover | Freelander 2 / LR2 | L359 | 2006 – 2014 | Front & Rear |
| for Land Rover | Range Rover | L322 | 2002 – 2012 | Front & Rear |
| for Land Rover | Range Rover | L405 | 2013 > | Front & Rear |
| for Land Rover | Range Rover Evoque | L538 / L551 | 2012 > | Front & Rear |
| for Land Rover | Range Rover Sport | L320 | 2005 – 2013 | Front & Rear |
| for Land Rover | Range Rover Sport | L494 | 2014 > | Front & Rear |
| for Land Rover | Range Rover Velar | L560 | 2017 > | Front & Rear |
| for Land Rover | New Defender | L663 | 2020 > | Front & Rear |
| for Jaguar | S-TYPE, XJ, XK, XF, F-TYPE, XE, F-PACE, E-PACE, I-PACE | — | 1999 > | Hub Nut |
⚠️ Critical Note: This nut has M24 x 2.0mm thread pitch. An alternative hub nut (RFD500020) with M24 x 1.5mm thread is also used across the same model range – the two are NOT interchangeable . Always verify the correct thread pitch by checking the existing nut or the stub axle thread before ordering.
Technical Specifications
| Parameter | Detail |
|---|---|
| Part Type | Rear Axle Nut / Hub Nut / Hex Stake Nut |
| Thread Size | M24 x 2.0 mm |
| Hex Size | 32mm or 36mm AF (check existing nut) |
| Material | Steel |
| Reusability | Single-use only – must be replaced when removed |
| Condition | Brand New, OE-Grade |