16.08kWh 51.2V 314Ah Floor Standing LiFePO4 Battery with Tower Design

This floor standing LiFePO4 battery uses a 51.2V 314Ah configuration with 16076Wh of listed nominal energy. The freestanding tower format places the battery capacity, BMS and DC connection within one enclosure designed for a protected indoor equipment area.

The product is relevant where a project requires approximately 16kWh of battery storage but does not require a wall-mounted layout or a multi-module rack assembly. A separate compatible inverter, DC protection system and cable set are still required.

Why Use a 314Ah Tower Instead of Smaller Modules

A single tower can reduce the number of separate battery enclosures, inter-module connections and mounting positions required to reach a 16kWh-class storage target.

This approach may create a cleaner equipment-room arrangement, but it also concentrates 118kg of product weight in one unit. Delivery access and lifting preparation are therefore more important than with several smaller batteries.

Delivery-to-Installation Sequence

1. Confirm that the unloading equipment can handle the 132kg packaged unit.

2. Measure doors, corridors and lifts against the 980 × 540 × 376mm package.

3. Prepare a stable floor position for the 800 × 450 × 286mm tower.

4. Reserve cable access, protection-device space and maintenance clearance before the battery is moved into place.

Optional Monitoring and Communication

An LCD display is available as an optional configuration for supported local battery information. Optional CAN and RS485 interfaces may support communication with selected inverter systems.

Communication compatibility is not determined by the port name alone. The inverter protocol, firmware, cable wiring and operating settings must also match the battery configuration.

Commissioning Boundaries

The connected inverter must support the 40.0–58.4Vdc battery range and the listed 56.0V floating-charge voltage. Continuous charging and discharge current must remain at or below 200A.

The 300A pulse capability applies for one second only. External cables, M8 connections, breakers, fuses and disconnect devices should be selected from the continuous current and actual installation conditions.

Tower Battery Planning Specifications

314Ah Tower Battery FAQ

Why is the product called 16.08kWh?

The specification lists 16076Wh of nominal energy, which is expressed as approximately 16.08kWh for product searching.

Can the tower be moved after installation?

It weighs 118kg net. Appropriate handling equipment and an approved movement procedure should be used.

Is the LCD included in every unit?

No. The LCD is listed as an optional configuration and should be confirmed with the order.

Can it be installed in a humid room?

The documented humidity range is 0–95% without condensation. A dry and controlled technical location is required.

What should be reviewed before shipment?

Review unloading equipment, access dimensions, final floor position, inverter settings and communication requirements.

Tower Delivery and Installation Review