LiFePO4 Portable Power Station 300W Pure Sine Wave for Camping RV Home Backup

Product Overview

The PS-896WH-300W-Q is a compact portable power solution equipped with an 896Wh LiFePO4 battery and 300W pure sine wave AC output. It is suitable for camping, RV travel, temporary home backup, mobile work and other low-power applications.

The battery, inverter, battery management system and MPPT solar charging controller are integrated into one vertical unit. The product supports AC charging, solar charging and combined AC plus solar charging for flexible indoor and outdoor use.

Key Product Advantages

896Wh LiFePO4 Battery

The integrated 896Wh battery provides stored energy for outdoor equipment, mobile electronics and essential low-power backup loads.

300W Pure Sine Wave Output

Stable pure sine wave AC output is suitable for compatible electronic devices with continuous operating power below 300W.

Flexible AC and Solar Charging

The unit supports up to 300W AC charging, up to 300W solar charging and a maximum combined AC plus solar charging input of 400W.

Compact Integrated Design

Its compact vertical structure integrates the main energy storage and power conversion components into one unit, reducing the need for separate external equipment.

Suitable Applications

Technical Specifications

Charging and Selection Guide

The portable power station can be recharged through a compatible AC power source, solar panels or simultaneous AC and solar input. For solar charging, the MPPT operating voltage range is 10–55Vdc, and the connected solar panel open-circuit voltage must not exceed 56Vdc.

• Keep the total continuous connected load below 300W.
• Check the starting power of compressor-based or motor-driven appliances.
• Confirm the solar panel voltage, connector type and polarity before connection.
• Actual operating time depends on load power, temperature and conversion efficiency.
• Confirm the required voltage, frequency and socket type before ordering.

Frequently Asked Questions

What devices can this portable power station run?

It can supply compatible devices with continuous operating power below 300W, including laptops, routers, LED lights, cameras, mobile phones, radios and selected low-power equipment.

Does it support solar panel charging?

Yes. The built-in MPPT controller supports up to 300W solar charging within a 10–55Vdc operating range.

Can it be used for home emergency backup?

Yes. It can provide temporary backup for selected low-power household devices, but it is not designed to supply an entire home electrical system.

What should buyers confirm before ordering?

Buyers should confirm the required AC voltage, frequency, socket configuration, charging accessories, packaging requirements, order quantity and target market.

B2B Supply Support

The PS-896WH-300W-Q is suitable for portable power distributors, outdoor equipment suppliers, solar product wholesalers and project buyers requiring a compact LiFePO4 backup power solution.

Voltertech provides product specification confirmation, socket and voltage selection, packaging information and quotation support according to customer requirements.