500 Watts Solid Powerful HiFi Amplifier Bluetooth 5.0 Aptx AAC SBC Hi-Res Stereo Wireless Receiver for Home Speakers
Connect with the XMP 250BT amplifier and enjoy the convenience of Bluetooth, auto-on, and auto-source switching technology that makes playing your favorite music a breeze.
Use this affordable, versatile Bluetooth HIF amplifier when more power is needed in a multi-zone system, or in a powerful, audiophile-grade stereo hi-fi setup.
The XMP-250 BT high fidelity power amplifier switches sources and powers on (in auto-on mode) automatically when a source signal is detected. Bluetooth 5.0 with aptX, two line input sources, two-channels, and Class D topology make XMP-250 BT amplifier the heavyweight in its class. The HiFi Bluetooth Amplifier features two pairs of RCA line level inputs and a loop-out from the second source to feed additional zones, receivers, or other devices. Use the HIFI Power Amplifier for additional power when connected to a multi-zone audio system, or by itself to power a stereo speaker system.
The Bluetooth Amplifier is rated at 80 watts RMS per channel into 4 ohms, and 60 watts RMS per channel into 8 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output. The amplifier is rated at 160 watts RMS into a single 8 ohm load when bridged. Each amplifier output channel incorporates robust protection circuitry for reliability and safety. Rack ears are included.
Features of the HiFi Bluetooth audio receiver
*Bluetooth 5.0 Amplifier with aptX technology for wireless Hi-Fi listening
Specification of the HIFI Bluetooth amplifier:
| Product name | XMP-250BT Bluetooth stereo HIFI amplifier |
| Output power | 2X250W per channel at 4ohm 2x125W per channel at 8ohm 1x500W at 1KHz 8ohm, bridge mode |
| Channel separation | 44 dB |
| THD | < 0.05% (@ 1kHz) |
| S/N Ratio | > 88dB |
| output noise | < 1mv |
| Input sensitivity | 700 mv |
| Frequency response | 20-20K Hz |
| Bass/Treble control | +/- 12dB at 100 Hz and 10K Hz |
| Class type | Home use Class D amplifier |
| Product working voltage | AC 110-240V/50Hz |
| Number of channels | 4 channels, speaker A/B selectable |
| Input methods | Bluetooth, RCA |
| Finish color | Black |
| Panel material | Aluminum |
| Net weight | 4 KGs |
Mode Select Switch
Pictures of the Bluetooth receiver amplifier:






