Rear View Dynamic Guideline Multimedia Video Interface for Peugeot Smeg Car Parking Aid

This retrofit kit is dedicated for Peugeot Citreon SMEG system, Reverse camera interface kits offer our backup camera interfaces to add backup camera, front camera or both, and DVR video input, while with dynamic parking guidelines moving with steering wheel.

How to install with a camera video interface?

This reverse camera interface kits includes LVDS cable, canbus harness, main unit and camera RCA connector.

1. dissamble car main unit with special professional tools

2. remove the car original LVDS cable, replace with our LVDS cable, and put the original one back to our main unit box.

3. disconnect car's canbus connector, replace with our canbus connector, while put the original one back to our canbus connector

4. select the right screen resolution and car model via switches

5. connect camera and camera power to RCA connector

6. keep the main unit box well and still in near glove box

5. recover the parts and ge the car start

Car Camera Video Interface Specification

BATT/ACC range: 7V - 25V
Stand.by power drain: <5mA
Power: 0.3A@12V
Power consumption: 2.4W
Video input: 0.7V˜1V
Video input formats: NTSC
AV-video amplitude: 0.7V with 75 Ohm impedance
Working Temperature: -40°C to +85°C
Weight: 195g
Dimensions: 182 x 24 x 100 mm

Multimedia Video Interface package including:

Package Contents:
1x Interface box
1x Power cable
1x LVDS cable
1x Manual

What is camera decorder video interface?

This interface allows : Camera Interface Module - Backup camera for Car RV Truck Tailgate Backup Camera Systems Wired & Wireless for rear view safety.

Camera interface is a decorder making to dedicated to fit with car factory screen, while decoders do serve the purpose of integrating IP cameras into a digital video recorder-based system, they also allow older monitors to show video footage. Which can help you to see very clearly the surrouding via front camera and rear camera.

Car camera multimedia video interface allows to connect two cameras to car's factory LCD monitor, it dedicated to design for AUDI NON MMI A4 A5 Q5 Cocert Symphony system, including the dedicated fit LVDS cable, power CANBUS cable, camera RCA connector, as well as a main unit. Everything design is for no harmness installation, just plug and play. After installation, you can see the camera view via car's factory screen to assist parking with dynamaic parking guidelines moving with the steering wheel. Which is neccessary and safe for each car.

Multimedia Video Interface compatible car model

For Peugeot SMEG 2015-2017 (800x480 screen)


Multimedia Video Interface Parameter

Multimedia Video Interface Functions