Introduction
Linear vibrating screen is designed with dual-vibration motor drive,two synchronous motors are reversely placed so that the exciter generate reverse excitation force, the exciting force generated by eccentric block cancel each other out on the parallel direction of motor axis,and stack together with the perpendicular direction of motor axis, so its trajectory is linear.Linear vibrating screen is suitable for particle size from 0.074 -5 mm,the maximum size should be less than 10mm.
Advantages and Feathers
♦ High screening efficiency, can be screened up to 200 mesh (0.074mm)
♦ Simple and convenient for changing and cleansing mesh screen
♦ Low noise and power consumption, easy maintenance
♦ Less blocking of mesh screen
♦ Automatic discharge of impurities and coarse materials, continuous operation
Technical datas:
Type | Layer | Sieve Dimension (mm) | Sieve Mesh (mesh) | Particle Size(mm) | Capacity (t/h) | Power (kW) | Double Amplitude (mm) | Frequency (r.p.m) | Screen Angle (degree) |
ZS-520 | 1-5 | 500X2000 | 2-325 | <20mm | <5 | 0.37x2 | 6-10 | 1460/960 | 0-10 |
ZS-525 | 1-5 | 500X2500 | 2-325 | <20mm | <8 | 0.37x2 | 6-10 | 1460/960 | 0-10 |
ZS-612 | 1-5 | 600X1200 | 2-325 | <20mm | <3 | 0.37x2 | 6-10 | 1460/960 | 0-10 |
ZS-1020 | 1-5 | 1000X2000 | 2-325 | <20mm | <12 | 0.75x2 | 6-10 | 1460/960 | 0-10 |
ZS-1025 | 1-5 | 1000X2500 | 2-325 | <20mm | <16 | 0.75x2 | 6-10 | 1460/960 | 0-10 |
ZS-1030 | 1-5 | 1000X3000 | 2-325 | <20mm | <20 | 1.1x2 | 6-10 | 1460/960 | 0-10 |
ZS-1224 | 1-5 | 1200X2400 | 2-325 | <20mm | <23 | 1.5x2 | 6-10 | 1460/960 | 0-10 |
Selection Conditions
♦ Material to be processed:
| ♦ Screen layer/deck/sieve number:
|
♦ Bulk density: t/m3 | ♦ Mesh size of every screen layer/deck/sieve: mm |
♦ Material Temperature: ºC | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Water Content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Drive: (Domestic or International brand or designated brand?) |
♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
♦ Max. granule size: mm | ♦ Working environment temperature: °C |
♦ Particle distribution percentage:
| ♦ Working power supply: 3 Phase V Hz |
♦ Handling capacity: t/h | ♦ Quantity: sets |