MachineU > China Products > Office & School Supplies > Correction Supplies > Correction Fluid
ATF-900 Full Synthetic Mercedes-Compatible Automatic Transmission Fluid 1L Pack
ATF-900 Full Synthetic Mercedes-Compatible Automatic Transmission Fluid 1L Pack
Specifications
Description
Request a Quote
/Transmission Fluid

ATF-900 Synthetic ATF for Mercedes-Benz Applications

A transmission lubricant built around the stated fluid category and referenced specification, with controlled friction characteristics, cleanliness and packaging for repeatable supply.

ATF-9001LPlastic Pack
Start an OEM / ODM Project View Technical Details

Technical compatibility must be confirmed against the equipment manual, final TDS and current product label.


ATF-900 Full Synthetic Mercedes-Compatible Automatic Transmission Fluid 1L Pack
Automatic Transmission Fluid1L
CategoryAutomatic Transmission Fluid
PerformanceProject-defined
Viscosity / GradeProject-defined
Pack Size1L
Product Positioning

Built around the application, not only the label.

Performance targets, base-oil route, additive system, packaging and test plan are aligned before production.

01

Friction control

The additive system is selected to support the engagement and shift behavior required by the intended transmission type.

02

Thermal stability

The fluid is designed to resist oxidation and viscosity change under normal transmission operating temperatures.

03

Component compatibility

Seal, clutch and material compatibility must be checked against the final specification and application.

04

Clean filling

Filtration, line clearance and first-piece checks help protect fluid cleanliness and packaging accuracy.

Technical Profile

Product specifications

Technical review required: one or more fields are incomplete or OCR-derived. Confirm the final label, TDS and applicable standard before publishing.
Product modelATF-900
Product categoryAutomatic Transmission Fluid
Performance levelTo be confirmed for the final SKU
SAE / consistency gradeTo be confirmed for the final SKU
Pack size1L
Packaging formatPlastic Pack
Referenced specification(s)To be confirmed for the final SKU
Referenced standardQ/YBATF 003-2019
How We Manufacture

From approved raw materials to released finished goods.

Our work begins when qualified base oils, additives and packaging materials enter the factory. The objective is a product that can be manufactured, tested, traced and repeatedly delivered.

01

Requirement definition

Application, market, performance level, viscosity, packaging, order volume and documentation are confirmed.

02

Raw-material acceptance

Supplier status, batch documents, packaging condition and relevant incoming properties are checked before use.

03

Formula and work instruction

The approved formula, dosing order, tolerances, temperature, mixing time and tests are controlled by version.

04

Blending and in-process QC

Materials are metered, blended and sampled. Out-of-target batches remain isolated until authorized action and re-test.

05

Filtration and filling

Line clearance, filtration, first-piece approval, fill quantity, closure, sealing, coding and carton checks are recorded.

06

Final release and traceability

Finished-product tests, packaging inspection and batch documents must be complete before shipment release.

Quality Evidence

Documents that correspond to the product and batch.

Documentation is supplied according to the final SKU, contract and market requirements. Certificates or approvals are never treated as universal across unrelated products.

COA

Batch Certificate of Analysis

Links the batch number, production date, release tests, specification limits and actual results.

TDS

Technical Data Sheet

Describes intended use, typical properties, performance level, viscosity grade and application guidance.

SDS

Safety Data Sheet

Covers hazards, handling, storage, transport, spill response and first-aid information.

LAB

Inspection and Third-Party Testing

Finished-product reports, validation tests or qualified third-party work can be arranged by project.

OEM / ODM Cooperation

Turn a market requirement into a repeatable product.

OEM is suitable when your product specification, brand and packaging are already defined. ODM starts earlier, with product positioning, formulation route, samples, packaging and validation developed together.

Performance levelViscosity gradeBase-oil routePack sizeBottle / pail / drumLabel and cartonTDS / SDS / COAExport support
  1. 01
    Requirement review

    Market, equipment, specifications, pack size, volume, target cost and launch timing.

  2. 02
    Feasibility and proposal

    Verified formula, optimized formula or new ODM development route.

  3. 03
    Sample and golden standard

    Sample version, internal testing, customer feedback and approved reference standard.

  4. 04
    Packaging approval

    Container, closure, seal, artwork, carton, code and shipping configuration.

  5. 05
    Mass production and release

    Version-controlled formula, documented process, batch testing and shipment documents.

Before Publication

Verification checklist

Can the stated grade be used in every vehicle or machine?

No. It is suitable only where the equipment manufacturer permits the stated product category, performance level, viscosity or consistency grade and referenced specification.

Are all referenced specifications formal approvals?

No. A specification shown on a label or parameter sheet is not automatically an active OEM approval. Approval language requires valid, product-specific evidence.

Which documents can be supplied?

Typical project documents include TDS, SDS/MSDS, batch COA and finished-product inspection records. Third-party reports and approvals depend on the specific SKU and project.

How is repeat-order consistency controlled?

Through approved samples, product specifications, formula version control, qualified materials, production instructions, process and final testing, batch records and retained samples.

Request a Quote

Tell us what you want to manufacture.

Include the target market, application, technical standard, viscosity or grade, pack size, estimated quantity and required documents.

Selected productATF-900 Synthetic ATF for Mercedes-Benz Applications



Country / channel
Units, drums or tonnes
Application, specification, viscosity, packaging, documents and target launch date
Prepare Inquiry Summary


FOSHAN YINGBA LUBRICATING OIL CO., LTD.

Lubricants, greases, packaging and private-label manufacturing support.

All technical values and claims must be verified against the final SKU documents before commercial publication or use.
Send your message to this supplier
Send Now

ATF-900 Full Synthetic Mercedes-Compatible Automatic Transmission Fluid 1L Pack

Ask Latest Price
Product Detail
Contact Supplier
ATF-900 Full Synthetic Mercedes-Compatible Automatic Transmission Fluid 1L Pack

Foshan Yingba Lubricating Oil CO.,LTD

Verified Supplier
1 Years
guangdong, foshan
Since 2010
Business Type :
Manufacturer
Main Products :
Motorcycle Engine Oil, Gasoline Engine Oil, Diesel Engine Oil
Total Annual :
300 million-400 million
Employee Number :
50~60
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Transmission Fluid
MachineU China Products Office & School Supplies Correction Supplies Correction Fluid
Contact Supplier
Submit Requirement