Touch screen control type of building materials flammability test furnace

Scope of application:

Product function characteristics:

1.Ergonomic Design: Fully automated touchscreen operation for all testing procedures, with data storage and historical access capabilities.
2.Servo Motor - Driven Sample Frame: Features controlled, automatic lifting.
3.Adjustable Ignition Source: Allows for precise adjustment of the flame.
4.Stainless Steel Chamber: Constructed from 1.5mm - thick stainless steel plate.
5.Dual - Angle Observation: Equipped with two tempered heat - resistant glass doors for convenient and practical testing observation.
6.High - Pressure Automatic Ignition: Ensures durable and reliable combustion.
7.45 - Degree Automatic Tilt: The ignition source can automatically tilt at 45 degrees.
8.Precision Flame Control: The flame height is adjusted using a precision control valve.
9.Multi - Directional Movement: The frame can move up, down, forward, and backward.
10.Sample Clips: Comes with two sample clips.
11.Flame Measurement Ruler: Included for accurate flame measurement.
12.High Automation: Delivers accurate experimental data and is easy to operate.
13.Dimensions: 835mm (W) × 400mm (D) × 815mm (H).
14.Material: Made of stainless steel.
15.Ventilation System: The bottom of the chamber has a flat natural vent composed of 2.5cm×2.55cm square vents (made of 1.5mm - thick steel plate, 50mm high) to ensure smooth air circulation.

Related technical parameters:

1.Ambient Temperature: 15℃～25℃
2.Relative Humidity: ≤85%
3.Power Supply: 220V, 50HZ, 100W
4.Gas Source: Commercial propane (purity ≥95%); liquefied petroleum gas (LPG) can be used for ordinary tests. (Note: Gas source and connection fittings provided by the user.)
5.Burner Flame Application: 15s for pattern testing
6.Control System: MCU-controlled with digital display
7.Burner Specifications: 0.17mm orifice diameter; flame length 20mm±1mm; burner tilts at 45°
8.Flame Application Time: (1s-99s)±0.5s (adjustable, precision ±0.2s)
9.Gas Requirement: Propane with ≥95% purity. (Note: Gas source and connection components are user-provided.)

Standard:

Applicable Standards:
ISO 11925 - 2:2002 E Test Method for Combustibility of Building Materials
Design Standard: GB/T 8626 - 2007 Test Method for Combustibility of Building Materials
Note:
Clause 4.10 of GB 8626 - 2007 specifies an optional wind speed device. Currently, third - party testing institutions generally require this device for acceptance. If not purchased at the initial stage, it can be retrofitted later.