Excavator Double Cylinder Hydraulic Shears For Demolition Industry

Characteristics:

1. Super strong shearing capacity: The dual hydraulic cylinder system can output shearing force of thousands of tons, easily cutting high-strength steel (such as large steel beams and thick steel plates), meeting the demands of heavy industry.
2. Precise control cutting: The dual-cylinder coordinated advanced hydraulic system precisely regulates the shearing force and speed to ensure smooth cuts with extremely small tolerances, making it suitable for high-precision metal processing.
3. Stable and safe operation: The symmetrical force application of the double cylinders ensures uniform force distribution on the blades, completely eliminating the problems of shearing skew and deviation, and enhancing the safety of operation and processing quality.
4. Green and efficient recycling: The entire process is free of open flames, dust, and low noise, meeting environmental protection construction standards. The purity of the sheared scrap steel is over 95%, the recovery rate exceeds 90%, and the residual value is significantly increased.

Application:

1. Demolition industry, such as cutting steel structures, crushing concrete, and demolishing houses, etc.
2. Industrial manufacturing: Cutting raw materials such as billets, aluminum sheets;Cut materials such as mold steel in mold manufacturing;Cut off the damaged parts ‌ during mechanical repair.

Advantages:

1. Broad-spectrum adaptability: The modular structure is compatible with mainstream excavators ranging from 6 to 35 tons. It can be optionally equipped with a 360° rotation device to achieve flexible operation from multiple angles and easily handle complex working conditions.
2. Full-cycle cost reduction: Shearing efficiency increased by over 30%, energy consumption reduced by 25%; The patented blade design reduces the cross-sectional area of the cut, reducing wear by over 40%. Combined with a maintenance-free hydraulic system, the maintenance cost is directly reduced by 50%.

Packing:

Under normal circumstances, we will first fix the products, then load them into packed wooden cases and finally transport them in containers

Main parameters:

Picture Show: