Wlan Access Point Ruckus ICX 7150-24P-4X1G 7150 Series 24 10/100/1000Mbps PoE + port Switch
Ruckus ICX 7150 switches, 24 10/100/1000Mbps PoE + port, and 2 part 1 g RJ45 port, four part 1 g SFP mouth (by license upgrade into 10 g SFP +) provide PoE power of 370 w, based on three layer function (support static routing and RIP)



| Switching capacity (data rate, full duplex) | 132 Gbps |
| Forwarding capacity (data rate, full duplex) | 98 Mpps |
| 10/100/1000 Mbps RJ45 downlinks | 24 |
| 100/1000 Mbps/2.5 Gbps RJ45 downlinks (full duplex only) | - |
| 10/100/1000 Mbps RJ45 uplinks (full duplex only, no PoE) | 2 |
| 1/10 Gbps SFP/SFP+ uplinks | 4 |
| PoE/PoE+ ports | 24 |
| PoH / PoE / PoE+ ports | - |
| Dual hot-swap power supplies | - |
| Maximum PoE Class 3 ports (15.4 W per port) | 24 |
| Maximum PoE+ Class 4 ports (30 W per port) | 12 |
| Base IPv4/v6 Layer 3 routing1 (static routing, RIP) | yes |
| Advanced IPv4/v6 Layer 3 routing1 (OSPF, VRRP, PIM, PBR features) | With license |
| Aggregated stacking bandwidth1 (data rate, full duplex) | 480 Gbps |
| Stacking density1 (maximum switches in a stack) | 12 |
| Stacking ports1 (maximum ports2 usable for stacking) | Up to 4×10 GbE SFP+ |
| Maximum stacking distance1 (distance between stacked switches) | 10 km |
| Power inlet (AC) | C14 |
| Input voltage/frequency | AC: 100 to 240 VAC @ 50 to 60 Hz |
| Power supply rated maximum (AC) | 525 W |
| PoE power budget (AC) | 370 W |
| Airflow | Side-to-back |
| Net Weight (Kg) | 4.93 |
| Connector options | * 10/100/1000 Mbps RJ-45 * 1 Gbps SFP ports * 1/10 Gbps SFP+ ports * Out-of-band Ethernet management: 10/100/1000 Mbps RJ-45 * Console management: RJ45 serial port and USB Type-C port with serial communication device class support * File transfer: USB port, standard-A plug |







