The XP500 BEAM model ARES, an ACME flagship high-power pure beam moving light, is mainly used for long-distance sharp light beams, multi-layer prism effects, and a wide range of pattern colors. It is the main light beam equipment for indoor tours, music festivals, electronic music events, large-scale performances, bars, and stadiums.
II. Light Source and Core Optical Parameters (Indoor Standard Version)
- Light Source: MSD Platinum 19R LL 420W Gas Discharge Lamp
- Reference Color Temperature: 6700K, Rated Lifespan 5000 Hours
- Total Light Output: 9900lm, Total Power Consumption 570W, Voltage 100–240V 50/60Hz
- Super Large Optical Lens: 200mm Large Aperture High-Definition Coated Lens
- Minimum Beam Angle: Only 1.3°, The Light Beam is Extremely Fine and Has Strong Penetrating Power
- 10-meter Illumination: Up to 990,000lux, No Decay at Long Distances in the Venue
- Electrically Precise Focusing: Throughout the Process No Fuzzy Edges, No Spotted Light Flashes, Sharp and Clean Edge of the Light Beam
III. Color System (Multi-layer Color Combination, Rainbow Dynamic)
- Linear CMY Infinite Mixing Color: Red/Green/Blue independent gradient, Smooth Color Transition without Breaks
- Independent Color Discs: 12 Saturated Color Plates + White Light, Built-in Red Reduction Filter, High CRI Correction Plate, Balancing Atmosphere Light and Portrait Supplementary Color
- Bidirectional High-Speed Rainbow Rolling Effect: Speed Adjustable; Combined with CTO Linear Color Temperature Correction 3200K–6500K, Continuous Switching from Cold White Light to Warm Yellow Light
IV. Patterns and Special Effects Wheel (Warrior of Patterns, Multi-layer Superposition)
- 1. Fixed Pattern Disk
- 10 High-Definition Metal Color Separation Patterns + 3 Flowing Special Effects Patterns + White Circle, Clear Patterns with Sharp Edges
- 2. Independent FX Effect Wheel (Double-layer Function)
- First Layer: 3 Water Wave / Cloudy Dynamic Plates, Can Overlap and Superimpose with the Fixed Pattern
- Second Layer: Light and Heavy Two Layers of Uniform Soft Light Plates, Eliminate Center Hole of the Light Beam, Balance Sharp Light Beam and Soft Light Spots
- 3. Multi Prism Combination (Core Selling Point, 8 Different Superposition Methods)
- Four Independent Prisms, All Support Bidirectional 360° Rotation, Arbitrary Superposition Activation:
- 8-Sided Octagonal Prism, 24-Sided Polyhedral Prism, 48-Sided Fine Prism, 6-Sided Linear Prism
- Single Prism, Double Prism Combination Can Produce Several Decades of Three-Dimensional Multi-Layer Light Beams, Electronic Music, High-Power Stage Atmosphere Fully Enhanced
- 4. Independent Fuzzing Plate
- Separate Soft Light Filter, One-click Switch Between Sharp Light Beam / Large Area Softening Light Spot, Balancing Light Beam and Light Coloring Dual Modes
V. Dimming, Strobe, and Three-Axis Head Movement
- Dimming System: 0–100% Electronic Linear Smooth Dimming,
- High-Speed Strobe: 0–30 Times/Second Variable Burst Flash, Synchronous / Asynchronous Strobe, Pulse Flash, Suitable for Nightclubs, Rock Stage
- High Precision 16-bit Positioning Motor: No Jitter in Movement, Automatic Out-of-Band Correction
- Horizontal Pan: 540° Wide Range Scanning
- Vertical Tilt: 260° Pitch
- Support Horizontal / Vertical Axis Locking: Fixed Light Beam at Point, High-Speed Movement No Trail
VI. Signal Control and Body Operation
- Standard DMX512: 3-pin + 5-pin XLR Input/Output, Dual Channel Mode 17/21 Channels
- RDM Remote Device Management: Remote Address Reading, Fault Detection, Parameter Modification
- Body Backlight LCD Display: Power Off Memory Address Codes and Parameters
- Firmware Upgrade: Support Local USB Upgrade, DMX Line Online Upgrade
- Power Direct Output: Multiple Lamps Connected in Series Wiring, Simplifies Stage Wiring
VII. Physical Structure and Installation (Indoor IP20 Version)
- Overall Size: 350×223×668mm
- Net Weight: 28kg, Lightweight Tour Body, Reduces Truss Bearing Pressure
- Standard 2 50mm Foldable Omega Lamp Hooks: Support Standing / Inverted Installation Methods
- The air duct circulation cooling system ensures stable temperature control even during long periods of full-power operation, with low noise levels.