★ User friendly dialog interactive helps operations like Calibration, making curves, etc.
★ All tools you need: DAC, AVG, TCG, AWS.
★ Pulse Repeatition Frequency: 20-2000Hz precise adjust, high speed scan, no miss out.
★ High Signal to noise ratio, clear and stable echo, anti-noise design, perfect for tough working conditions.
★ 12-digit AD, high speed sampling leads to better echo diagram with all details. Sensitive and can detect even tiny flaws.
★ Can use probe frequency 20M perfectly .
★ High speed real-time flaw detection video recording. Unlimited USB data storage.
★ IP65 standard. Alloy + Silica gel case, water and dust proof, solid and lasts forever. Damping support makes it stands in any angle.
★ Battery lasts 15 hours for one charge. Each battery has own charging control so with two batteries it can work around the clock.
 
 
 





 
Specifications
 Range:0-10000 mm ,at steel velocity
 Material Velocity:100~20000 m/s
 Pulse Repetition Frequency:20-2000Hz
 Dynamic range:≥38dB
 Linearity: Horizontal: +/-0.2%, Vertical: 2.0%, Amplifier Accuracy +/-1 dB.
 Resolving Power:>40dB (5P14)
 Sensitivity Leavings:>66dB
 Reject (suppression): 0 to 80% full screen height
 500 independence setup, any criterion can be input freely, we can work in the scene without test block;
 Big memory of 1000 A graph
 Test Modes: Pulse echo, dual element and thru-transmission
 Probe Types: Single Straight, Single Angle,Daul Straight, Daul Anlge,Thrugh,Creeping,Surface
 Gate Monitors: Two independent gates controllable over entire sweep range
 Units: Inch or millimeter
 Power Requirements: AC Mains 100-240 VAC, 50-60 Hz
 Display Delay: -20 to 3400 µs
 Probe Delay/Zero Offset : 0 to 99.99µs
 Internal rechargeable Li-ion battery pack rated 7.2V at 7800 mAh
 15 hours nominal operating time depending on display brightness
 4 hours typical recharge time
 H×W×D(mm):240×150×50 (mm)
 Weight :1.4kg
 Operating Temperature: -10℃ to 50℃
 Storage Temperature: -30℃ to 50℃
 Pulse Energy: 70V,100V,200V, 300V, 400V, 500V selectable
 Rectification: Positive half wave, negative half wave, full wave, RF System
 Bandwidth (amplifier bandpass ): 0.2 to 20 MHz
 Gate Monitors: Two independent gates controllable over entire sweep range
 Sensitivity: 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB.
 Transducer Connections: LEMO 01
 
Functions
 
 Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,ф).
 Flaw sizing: Automatic flaw sizing using AVG or DAC/TCG, speeds reporting of defect acceptance or rejection.
 Automated calibration of transducer Zero-point, Angles, Front edge and material Velocity . ( V2 and two hole )
 Convenient to make and use DAC/TCG and AVG to evaluate the echo, the curve can be modified and compensated.
 Connecting U-Disk,the unit can get unlimited memory. 
 Automated make video of test process and play; use upan,the length of video is unlimited.(Option)
 Color B scan.( Option )
 There are 15 standards of in the unit.
 Blue tooth connection to mobile device to generate and print detection reports on-site.(Option)
 AWS D1.1.
 Curved Surface Correction feature.
 Crack Height Measure function.
 Magnify gate:spreading of the gate range over the entire screen width.
 Auto-gain function.
 Envelope: Simultaneous display of live A-scan at 70 Hz update rate and envelope of A-scan
 display.
 Peak Hold: Compare frozen peak waveforms to live A-Scans to easily interpret test results.
 Scan Freeze:Display freeze holds waveform and sound path data.
 Alarm:Beep and LED.
 Real Time Clock.
 Fill echo.
 Capture mark.
 Echo color within the Gate.
Base Instrument Package
1. Portable Ultrasonic Flaw Detector
2. Straight Beam Transducer (2.5 MHz, Φ20)
3. Angle Beam Transducer (4 MHz, 8 mm×9 mm, 60°)
4. Interconnect Cable for the transducer (Q9-C9 and C9- C5)
5. Rechargeable Li-Ion Battery Package, 8 amp hour
6. Power supply/charger unit
7. Operating Manual in English