Smart Entrance RFID Card Solutions Pedestrian Access Control Barrier Flap Turnstile Gate for gym building school subway
Description
1. working method can be set by the buttons on the main panel 2. This model is double wing flap gate, low noise, smaller casing, save space 3. Anti-pinch by mechanism and sensor If there is block during return of gate, motor stops working automatically. Reset again after a default delay, the force 2Kg. 4.Anti-illegal in, anti-intrusion, auto close for reverse direction. 5. Anti-collision, gate closes when no valid signal is given. 6. Gates can be synchronous 7.Auto-reset. If not go through in a preset time, pass right would be cancelled automatically. (1-60s adjustable), default time is 10s. 8. Reset function by photocells,Anti-pinch function by photocells, ( 3 or 5 pairs sensors) 9. Compatible with Access control system, consumption system, ESD system, E-ticket system and so on. 10. One way or two way control 11 Unit can be controlled and administered by remote control
Technical parameter | |
Product number | CW507 |
Voltage | AC220V±10%, 50HZ±10% HZ |
Working temperature | ‘-25℃-70℃ |
Relative humidity | 5%--90% |
Motor | 40W brushless DC |
Rated power | 70W |
Input control signal | Switch quantity (standard configuration does not include RS232, 485) |
Running speed | 30-40 people/minute |
Infrared beam | 4 pairs |
Number of trouble-free runs | 5 million times |
Average life span | 6 million times |
Channel width | 600mm |
Swing arm material | 15mm acrylic door panel |
Product Size | 1400*300*990mm |
Channel frame | 1.2~1.5mm thick 304 stainless steel |
Package weight | About 65 KG (single side road) |
Feature Of Flap Barrier Turnstile