SGS 120W Wireless Access Control Barrier 6m Boom For Exit
Product Overview
Wireless access control barrier arm operators with loop detection for exit applications.
WEJOIN Barrier Gate Spring Selection
| Boom Type |
Boom Length (M) |
Spring Diameter ∅ (mm) |
| Straight Boom without Rubber |
6 ≥ L ≥ 4.8 |
∅5.5 + ∅4.5 |
| 4.8 > L ≥ 3.5 |
∅5.5 |
| 3.5 > L ≥ 2.5 |
∅4.5 |
| Straight Boom with Rubber |
6 ≥ L ≥ 5.3 |
∅6.8 + ∅4.5 |
| 5.3 ≥ L ≥ 4.3 |
∅5.5 + ∅4.5 |
| 4.3 > L ≥ 3.5 |
∅4.5 + ∅4.5 |
| 3.5 > L ≥ 3 |
∅5.5 |
| 3 > L |
∅4.5 |
Technical Specifications
- Working Power: 220V±10%, 110V±10%
- Motor Power: 120W MAX
- Humidity: ≤90% RH
- Remote Control Distance: L > 30m
- Insulation Grade: F
- Maximum Motor Power: 120W
Troubleshooting Guide
Q: When power-on, press the "UP" or "DOWN" button, there is a reaction on the boom.
A: Check the power supply and the fuse.
A: Check if the remote controller matches the radio receiver; or check the battery inside and replace it if it lacks power.
A: Check whether there is co-channel interference, and press the buttons on the control board to check if it can work.
A: Check if the external protection circuit is failing or in protection status. Check the condition of photocell and loop detector are lighting.