Home automation sliding gate operator for residential sliding gates
Sliding door opener; Door opener
 1) Built-in control board.
 2) Smooth start-up.
 3) Max weight of gate: 1800Kg.
Electronic Data
|  			 Model  |  			 			 KMP202  |  		
|  			 Soft start  |  			 			 YES  |  		
|  			 Stop on obstacle (sensitivity adjustable)  |  			 			 YES  |  		
|  			 Auto warming-up (at freezing temperature)  |  			 			 YES  |  		
|  			 Remote control  |  			 			 418MHz (50m, approx)  |  		
|  			 Wire control  |  			 			 Available  |  		
|  			 Auto closing  |  			 			 YES  |  		
|  			 Vehicle loop detector socket  |  			 			 YES  |  		
|  			 Photocell socket  |  			 			 YES  |  		
|  			 Alarm light socket  |  			 			 YES  |  		
Functions:
 1) Thermal prection and ensure running smoothly though in low voltage
 2) Magneticl limit switch, and accurate limit braking
 3) Open and close limits have a self-locking function
 4) Intelligent interfaces with alarm lamp, photocell, etc for security
 5) Optional line control or remote control, manual control
Troubleshooting
1 The motor runs but the sliding gate operator doesn't work.
 A: Check whether the clutch is closed.
2 The power indicator light doesn't flash and the key doesn't react.
 A: Check whether power is connected right.
 B: Check whether the fusel is burned, it yes, please exchange it.
3 The opening and closing limit can not work.
 A: Check whether the limit adjustment switch is installed right.
 B: Check whether the limit iron is installed right. Adjust the position of the limit iron.
4 Crash proof is not effective.
 A Check whether the connection of crash proof is correct.
 B: Check whether the photocell is installed right.
 C: Check whether the connection of the wire of the loop detector is right.
5 When the gate just close up, it turns to open.
 A: Check whether the voltage is normal.
 B: If the crash proof equipment is installed, please check whether it works well.
6 The remote control doesn't work
 A: Check whether the battery is low. If yes, change it.
 B Check whether the code of the remote control is the same with the code of the control panel.
