Product Parameter
| Name | H9 6x4 Mixer Truck | ||
| Brand / Series | CAMC / H9 electric energy type | ||
| Drive type | 6x4 | ||
| Wheel base(mm) | 3600 | ||
| Quasi-tow mass(kg) | 34865 | ||
| Kerb Weight (kg) | 6805 | ||
| Rated GVW/ GVW (kg) | 6805/18000 | ||
| Overall dimension (mm) | 5915x2495x3200 | ||
| CAB | |||
| Type | CAMC H9 flat roof Cab | ||
| Color | Standard color: red, yellow, blue, white; others: optional but charge | ||
| Parameter | With two berth,Berth curtain,Leather 4-spoke Steering Wheel,Rear window,electronic and Hydraulic reversal cab,power window, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, heating & ventilation system, adjustable roof flap, with stereo radio and MP3, and adjustable steering wheel, air horn, single berth with 4-point support fully floating suspension and shock absorber with transverse stabilizer, safety belt. | ||
| Others | A/C, radio,MP3, one sleeper, curtain etc. | ||
| ENGINE | |||
| Supplier | CAMC-The Chinese most advanced truck Engine Producer | ||
| Model |
| ||
| Type | Four-troke, water-cooled, in-line, wet-liner, direct-injection | ||
| Maximum power/horsepower(kw/hp) | 254/345 | ||
| Maximum rated speed(rpm) | 1900 | ||
| Max torque(N.m/rpm) | 1660/1100-1400 | ||
| Cylinders | 6 | ||
| Bore x Stroke (mm) | 118*150 | ||
| Displacement (L) | 9.84 | ||
| Controller type | Electrical | ||
| Air cleaner | Dry paper element | ||
| Emission Standard | Euro V | ||
| TRANSMISSION | |||
| Supplier | CAMC (same level as ZF technology) | ||
| Model | 9SDB2051A | ||
| Type | Mechanical & manual with servo & Synchronizer & creep | ||
| Speed ratio | 9 forward ratio:15.49, 12.07,8.35,5.67,4.07,2.96,2.05,1.39,1.00 | ||
| 1 reverse ratio:14.19 | |||
| CLUCH | |||
| Type | Single- plate dry diaphragm spring clutch, diameter 430(A) mm, hydraulically operating with air assistance | ||
| Plate diameter | 430mm | ||
| STEERING SYSTEM | |||
| Driving position | Left or Right hand drive available | ||
| Type | hydraulic steering with power assistance | ||
| Ratio | 22.2-26.2:1 | ||
| Supplier | CAMC | ||
| Front axle | CAMC technology steering axle with double T-cross section, Rated capacity:7.5T | ||
| Rear axle | CAMC technology 16T casting axle , with double reduction and differential locks between axles, Rated capacity:16T | ||
| ratio: 4.10 | |||




