Eye Link Flex Wire Ring Conveyor Belts For Frezzing

Eye Link Conveyor Belt Description

Eye Link Conveyor Belts, also named Wire Link Conveyor Belts, Eye-Flex Conveyor Belt, Wire Loop Belt. Eye link belts are produced of stainless steel or other alloys. They consist of a series of eye links or eye link modules. Joined with cross rods they form a flat, simple surface, which is extremely stable and durable. The qualities of this versatile conveyor belt form a combination of advantages that make it particularly suitable for the most demanding applications in the food, chemical, pharmaceutical and packaging industries.

We can not only provide right belts, but also provide matching sprockets and other components.

Eye Link Conveyor Belt Feature

Additionally, the open structure of the rolled belts creates an appealing, characteristic pattern on the bottom of the products, which is often desirable in many baked goods. The superior air permeability of our belts also promotes optimal heat circulation within the oven, leading to more consistent baking results and reducing energy consumption. This improved heat management can often result in faster baking times, making the entire process more efficient and cost-effective.

• Smooth baking surface.

• High strength and stability.

• Long service life and Low maintenance.

• Excellent air circulation and heat distribution.

• Stratified metal spiral structure.

• Lightweight with reduced thickness.

• Low heat inertia.

• Looped edge or welded edge.

Eye Link Conveyor Belt Applications

Eye Link Conveyor Belt Specification

Material Availability

Belt Types

Full eye links

On a full eye link belt the eyelinks lie against each other, and the opening is equal to the wire diameter. It is designed and built without spacers or perpendicularly welded under wires. This allows excellent flow-through in applications where no cross-support is required. The belt is often used in food processing for its flat conveying surface, open mesh configuration, and ease of cleaning. This type eye Link Conveyor Belt without spacers is also easily repaired with minimal cost.

Pressed eye links

Some applications require the smallest opening possible. By flattening the eyes of the eye links the opening between the links becomes smaller. This type is very appropriate for small and fine-structured products.

Welded eye links

The eye links are welded on to an location wire, so that a module is created. Very narrow and very wide openings can be created, depending on the processing of the products concerned.The underwelded wire eliminates the potential bacteria traps under the spacers, springs, rings, and sleeves. This configuration makes cleaning and sanitation easy and more efficient.

Pressed and welded eye links

Some applications require a stable belt in combination with a small opening/drain. The accuracy of our welding process allows us to produce modules with very small intervals between the eye links. The modular structure makes the assembly of very broad belts possible.

Eye links with springs

Springs help create a more dimensionally stable belt in heating or freezing applications. These belts are more dimensionally stable because the wires are able to move on the cross rod. Springs also expose a large proportion of the connecting rod for improved cleaning and sanitizing. The placement of springs between the eye links ensures that they are positioned at regular intervals. The result is a relatively light belt with specific qualities, such as a good shock resistance and resistance to lateral forces.

Eye links with bushings or washers

This versatile variation of eye link belt uses bushings or washers between the wires to increase the belt gap. By increasing the belt gap, more air will circulate around the bottom of the product. Increasing the product exposure to this additional air flow improves the efficiency of your process. When bushings or washers are added the belts become heavier and more rigid.

Edge Availability

Eye Link Belt with Welded edge

At both sides the belt is fitted with plate links, and the far ends of the cross rods are fitted with washers and subsequently welded. This results in a thorough finishing of the belt in combination with the desired bearing surface.

Eye Link Belt with Reinforcing Plates

Reinforcing plates are the typical edge style. These are solid metal plates added before the connecting rod is welded. The belt edges are generally formed by two ore more rows of plate links. The wire links and plate links are assembled on the cross rod which is fitted on both sides with a welded ring or a butted head. Additional reinforcing plates can be added at the edge of the belt, or at specified increments across the belt width to further enhance the strength of this belt.

Eye Link Belt with Chain Edge

The belt edges are formed by a hollow pin chain. The links and chains are assembled on the cross rod which is fitted on both sides with a welded ring. The chain is mostly kept in place by welding a ring to the outside as well as to the inside of the chain. If the ends of the cross rods are narrowed, the inside of the chain is secured by this narrowing and the inner ring is cancelled. Chain edges on Eye link belts as an alternative method for driving the belt for enhanced tracking and reliability.

Eye Link Belt with side Guards

Eye Link belts can be equipped with side guards to prevent product from falling off the side of the belt. Height and shape of the side guards can be customized for your product or application. These side guards can also be inserted at various points across the belt width providing a positive separation between rows of product.

Contact us

FAQ

Q1. Are you a factory or trading company?

A: We are both factory and trade company

Q2. How to place an order?

A: Once you find the US, you can place an order on Alibaba or signed a contract with the US.30% deposit is charged before customized fabric are manufactured

Q3. What about payment terms?

A: T/T, L/C, Western Union, Escrow, Paypal, and some other payment terms are accepted.

Q4. What about the shipping date?

A: The shipping date would be in 15 days after contract confirmed, except customized fabric.