Yunyi 4X Rated Wireless Magnetostrictive Gauge Outdoor Chemical Storage
Wireless Magnetostrictive Level Gauge utilizes magnetostrictive waveguide technology combined with industrial IoT architecture (LoRaWAN/NB-IoT/4G). Capable of high-precision level, interface, and temperature reading, this wireless transmitter uses magnetostrictive waveguides and supports multi-protocol IoT communication.
The system works by measuring torsional waves from magnetic floats, eliminating mechanical errors. Its robust design and battery operation make it suited for hazardous and remote areas requiring dependable, calibration-free monitoring.
Specification
| Model |
YLMW400 |
| Medium |
Compatible liquid with the material |
| Medium pressure |
-0.05 ~ 10MPa |
| Medium viscosity |
0.5 ~ 2.0g/cm3 |
| Resistance |
adjustable between 0~24s |
| Maximum load |
50×(power supply voltage-9)Ω |
| Dead zone |
upper dead zone 50mm; bottom dead zone 50mm |
| Power influence |
Less than 0.005%/V of output range |
Advantages
- Metrology-grade accuracy: ±0.05% FS with micron-level resolution, capable of detecting liquid level fluctuations as small as 0.1mm, eliminating trade disputes.
- Three-parameter simultaneous measurement: Single instrument simultaneously outputs liquid level + interface + temperature (accuracy ±0.5°C), reducing overall costs by 40%.
- Fully wireless and maintenance-free: Battery life of over 8 years (with 4 daily reports), IP68 protection, no calibration required for life (temperature drift <0.001%/°C).
- Full adaptability from deep cold to high temperature: Operates in a wide temperature range of -196°C to 200°C (deep cold type reaches -269°C), resistant to condensation and boiling disturbances.
- Intelligent diagnostic cloud platform: Magnetic float adhesion warning, density anomaly analysis, leakage trend estimation, reducing fault downtime by 90%.
Company Profile