Micro Differential Pressure Gauge Differential Pressure Gauge
Description Micro Differential Pressure Gauge
Micro Differential Pressure Gauge Differential Pressure Gauge minimum range is 0-30Pa, maximum range 0-30KPa. There are as many as 88 kinds of range and metric / imperial units to choose from. 
 This differential pressure gauge using frictionless magnetic components, can rapidly measure the micro-pressure air or non-corrosive gases, including positive, negative (vacuum) or differential. No wear, hysteresis and clearance. Not filling, vaporization and freezing. This design has anti-vibration, anti-shake and high overpressure capability, you can guarantee access to high precision. The design impact, shock and overload protection.
Specification Micro Differential Pressure Gauge
| Medium | air and non-combustible, compatible gases (optional gas) | 
| Housing | cast aluminum housing or ABS shell, glass beveled panels. Dark gray coating, can withstand 168 hours salt spray test | 
| Accuracy | 2% FS (mm units, and the range with the corresponding pa) | 
| Pressure range | -20Hg To 15 psig (-0.677 bar to 1.034 bar) | 
| Temperature range | 20 to 140 ° F (-6.67 to 60 ° C) | 
| Hole size | 114mm | 
| Mounting Orientation | Diaphragm in vertical | 
| Connections | same 1/8 "NPT high and low pressure fittings, one pair on the side, one pair in the back | 
| Weight | 500g / only | 
| Standard accessories | two 1/8 "NPT threaded connectors for high and low pressure fittings can be connected with a rubber tube; two 1/8" NPT plug for blocking the remaining two high and low pressure ports; three a threaded countersunk mounting coupling (mounting ring, according to buckle holder for three interfaces to replace MP and count on attachments HP). | 
Features Micro Differential Pressure Gauge
