0-5v air compressor pressure transducer without liquid transmission, the pressure directly on the front surface of the ceramic diaphragm, so that the diaphragm has a small deformation, thick film resistance printed on the back of the ceramic diaphragm, connected into a Wheatstone bridge (closed bridge), due to the piezoresistive effect of the varistor, the bridge is generated with a high linearity proportional to the pressure, and the voltage signal is proportional to the excitation voltage. 
 Specification 0-5v air compressor pressure transducer
| Pressure | -100KPa~6.0MPa Absolute or Sealed gauge pressure | 
| Power supply | Between 12~36V | 
| Output | Current ,Voltage, Digital signal optional (see option page) | 
| Overload | 2 times the basic overload | 
| Material | Ceramic + stainless steel 316 | 
| Seal | Fluorine rubber seal non-internal seal | 
| Thread | Optional (see option page) | 
| Accuracy | 0.2 0.5(20°C) | 
| Warming | ±0.08FS/°C | 
| Sound frequency | 200HZ | 
| Temperature | Medium temperature -30 ~ 100 °C Ambient temperature -30 ~ 80 °C | 
| Protection | IP65 or IP67 High magnetic compatibility | 
Detailed Images 0-5v air compressor pressure transducer


Process control, environmental control, hydraulic and pneumatic equipment, servo valves and drives, chemicals and chemical industry and medical instrumentation and many other fields.
 Selection Guide 0-5v air compressor pressure transducer
|  			 0-5v disposable water pressure transducer 
  |  		|||||
|  			 YD-31 
 
 
  |  			Base Model | ||||
| Code | Electrical connection | ||||
| B | Hessman connection | ||||
| C | Direct outlet | ||||
| D | Air plug connector | ||||
| Code | Output signal | ||||
| S1 | 4-20mA | ||||
| S2 | 0-5V | ||||
| S3 | 0-10V | ||||
| S4 | 1-5V | ||||
| S5 | 0-5V | ||||
| S6 | 485 Digital signal(485RTU protocol) | ||||
| Code | Pressure Range | ||||
| See Table 1 Gauge pressure is G Absolute pressure is A | |||||
| Code | Thread size | ||||
| M1 | M20*1.5 | ||||
| M2 | G1/2 | ||||
| M3 | G1/4 | ||||
| M4 | NPT1/2 | ||||
| M5 | NPT/4 | ||||
| M6 | M14*1.5 | ||||
| M7 | other | ||||
| YD-31 | B | S1 | G17 | M1 |  			 Stand for 25MPA 4-20 mA transmitter 
  |  		
Q: How long will you reply me?
 A: We will contact you as soon as possible but within 12 hours.
 
 Q: Can I get some samples?
 A: Yes, Sample order is available for quality check and market test. But you have to pay the express cost.
 
 Q: How soon can you arrange your production?
 A: Once getting your product confirmation and receiving the prepayment, the production will be started immediately.
 
 Q: What's delivery time?
 A: It usually takes about 3-5 working days for small order and 10-15 days for big order.
 
 Q: How do you control your quality ?
 A: Three inspection steps(of original, production, and finished goods) + good warranty service(1 year free to change a new one without any human damage factors).
 
 Q: What certificates do you have ?
 A: ISO9000, CE, Explosion-proof certification, RoHs ready. And before the delievry of goods, quality and safety inspection certification issued by third parts also can be offered.
 
 Q: Could I visit your factory?
 A: Very welcome! Fly to Xian Yang air port. It was a big pleasure for us.
 
 Q: What's your warranty terms?
 A: We offer 12 months warranty time.
 
 Q: Can you provide OEM & Customized service?
 A: Yes, OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.